Can Storage Boxes be Mounted on Front of V-Nose Trailer

Question

Question:

Please, Is there a tongue mounted tool box made that fits on the front of a cargo trailer with a pointed front wall? Thanks

asked by: Michael G

0

Expert Reply:

We have seen people mount storage boxes on either side of the nose of a V-nose trailer like what you see in the picture I attached.

The part # DZ91717P would work well if you have room for it like that. The dimensions of the box are 36" long (back) x 18" long (front) x 19-1/2" wide x 17-3/4" tall.

expert reply by: Jameson C

0

click to enlarge

Charles M.

2/11/2020

Where can I get the bracket that holds these boxes on the v nose trailer from?

Reply

Jacob H.

2/12/2020

The bracket in the picture is a custom made bracket that this customer made to hold his two tool boxes.

Reply

Jeff

4/27/2020

Yeah I’m also interested in the bracket. How can I buy one.?

Reply

Chris R.

4/28/2020

Like Jacob mentioned, that bracket you see was custom-made by the customer who submitted the picture. Unfortunately it's not something that's available on our site.

Reply

Answer 1

In order to actuate your trailer brakes, you'll need to install a brake controller to operate them, as your truck doesn't already have a brake controller. Since your Dodge Ram 2500 doesn't have the factory 7-way, not all the brake…

view full answer...

Answer 2

The Mopar brake controller is identical to the one they put in at the factory on certain Ram trucks. It is made specifically to fit the trucks it was designed for. In the aftermarket options there is nothing that is going to fit the same but they are…

view full answer...

Answer 3

The part #DZ91717P has dimensions of 36" long (back) x 18" long (front) x 19-1/2" wide x 17-3/4" tall. If you planned to install it on your trailer like what is seen in the picture I attached there's a pretty good chance the…

view full answer...

Answer 4

From the base of the #C40047 up to the top of the ball measures 4.091 inches. This is about 1-3/8 inches taller than a standard ball.

view full answer...

Answer 5

The 3,500 lb capacity Curt RockerBall Shock Absorbing 2" Hitch Ball #C94CR (40246) does not have a softer cushion than the 7,500 lb RockerBall #C40047. The cushioning is the same and the difference between these two is the capacity, of course,…

view full answer...

Answer 6

The Curt RockerBall Anti-Rattle Towing Kit #C43KR takes the additional height of the base of the RockerBall into account for the listed 4" rise and 5" drop. I have attached an image below showing how it is measured. Typically, you find the…

view full answer...

Answer 7

The ball must be greased when using the Curt RockerBall Shock Absorbing 2" Hitch Ball #C40047. As you can see by the cut out of the linked instructions, if you don't have adequate lubrication the ball can fail so it is imperative you do. The…

view full answer...

Answer 8

You will need to have a custom mount fabricated for installing 2 of the DeeZee Specialty Series Trailer Tongue Tool Boxes #DZ91717P. As not all V-Nose trailers are going to have the same dimensions and the frames can also have different positions the…

view full answer...

Answer 9

For your trailer and situation I recommend the Trailer Valet RVR12 Remote-Controlled Trailer Dolly #TV59FR. This dolly is rated for trailers with a tongue weight up to 1,200lbs and a trailer weight up to 12,000lbs. Your trailer has a maximum trailer…

view full answer...

Answer 10

Equal-I-zer doesn't offer a full kit for an 8 inch frame, but we can provide the parts you need. If you have an existing kit, and you're wanting a complete kit to use your system on a second trailer, you'll need: 2 of #EQ90-02-5378 Outer…

view full answer...

Answer 11

I do have a couple options that will work for you, but unfortunately there isn't one perfect option that provides everything you are looking for. I have included the options below, along with some of the things that make them work or not work for…

view full answer...

Answer 12

Hey Peyton, Yes, those things are all indeed compatible as the crossmember won't come into contact with the over/under kit. As for the correct kit, that depends on the size of your Keystone Cougar's axles. For 2-3/8" diameter axles use…

view full answer...

Can Storage Boxes be Mounted on Front of V-Nose Trailer

Product Page this Question was Asked From

Continue Researching