Can Trailer Weight Capacity Be Increased by Changing One Trailer Axle
Published 11/11/2016
Question:
Can you combine 3500# axle with a 5000# axle to help beaf up your trailer capacity
asked by: Derek W
Helpful Expert Reply:
A trailer's weight carrying capacity depends on many components: the trailer frame itself, axles, suspension, hubs, wheels and tires. Upgrading one component, say an axle, might increase the trailer's capacity but only if that axle was the lowest-rated part of the trailer.
It is not advisable to use two differently-rated axles on the same trailer. Strictly speaking, it is theoretically possible, IF the trailer were to be loaded up with the cargo load perfectly distributed across the two different axles. However, in actual practice this would be a real tough thing to pull off without the risk of overloading some portion of the trailer.
If you know the trailer manufacturer and they are still in business you can contact them with the VIN for the trailer to see if they can offer you any help with the idea of increasing its capacity. If you're lucky they will be able to give you the capacity of the trailer frame and the other components to let you know if there is room to swap out parts that will give you a higher weight rating.
Product Page this Question was Asked From
6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles - 26" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 4500 lbs
- 1-3/4 Inch Wide
- 6 Leaf
- 26 Inch Long
- Standard Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Curt Weight Distribution Shank for 2.5" Hitches - 9-1/4" or 10" Drop - 13" Rise
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop
- Shop: Equal-i-zer Weight Dist Shank - 12" Long - 8" Rise, 4" Drop - 600 to 1,400 lbs TW
- Shop: Curt Welded Weight Distribution Shank 7" - 10 Hole Adjustment
- Article: 5 Things to Know About Weight Distribution Hitches
- Shop: Fastway e2 Weight Distribution Shank - 12" Long - 12-1/2" Rise 9-3/4" Drop - 1.2K TW
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 8" Rise, 4" Drop
- Shop: Equal-i-zer Weight Dist Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Q&A: How Can I Increase My Enclosed Trailer Maximum Payload Weight Capacity?
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer lights
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Article: Trailer Lighting Requirements
- Video: Measuring To Choose The Right Trailer Axle
- Search Results: trailer jack
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Shop: Suspension Enhancement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer tires and wheels
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Best Grease for Trailer Bearings
- Shop: Brake Controller
- Search Results: trailer wiring
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
on Trailer Leaf Springs
