Does 12V Pin on 7-way Trailer Connector Always Have Power

Question

Question:

Is the + side of my 7 way trailer connector always powered

asked by: Bill P

1

Helpful Expert Reply:

It sounds like you're asking about the 12V circuit on the 7-way trailer connector on the rear of your 2003 Chevrolet Trailblazer. Some vehicles will always have power and some others will not. We don't have this specific information for your vehicle, but to determine if your 12V always has power you can test the pin in the 1 O'clock position on your 7-way.

The other pins will have power when the corresponding light is used or the brake pedal is pressed.

expert reply by: Charles S

1

click to enlarge

James P.

8/5/2020

My F-250 doesn’t have constant 12v to the trailer plugin. How can I get a constant 12 volts?

Reply

Chris R.

8/15/2020

If you want to have constant 12V power to the trailer, even when the truck's ignition is off, you can simply manually run your own hot lead. To do this run a length of 10 gauge wiring # 10-1-1 from the 12V pin on the 7-Way up to the battery's positive post via a circuit breaker like # 9510.

Reply

Answer 1

The only pin that should be continuously showing 12V power on the 7-Way connector on your vehicle is the 12V power circuit which is normally the black wire but not always. In 7-way wiring the 12V auxiliary power feed is carried on the contact at the…

view full answer...

Answer 2

The light that indicates that the 12 volt circuit is hot is normal and it will not drain the battery. Think of it as the battery having a really long positive terminal that just extends to the rear of the vehicle. If nothing is drawing power from it,…

view full answer...

Answer 3

The auxiliary 12-volt wire that runs from the 7-way connection to 7-way trailer plug will supply 12-volt power from the vehicle to the trailer. The 12 -volt power will allow interior or exterior lights to run that are not wired in to the…

view full answer...

Answer 4

The Advent Air RV Air Conditioner w/ Air Distribution Box, #ACM135CH requires an opening of 14-¼” by 14-¼”; this is the unofficial industry standard with a tolerance of +/- about a 1/8”. This is for roofs 2-1/2" to 5" thick. This…

view full answer...

Answer 5

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 6

Hey Paul, Yep, you do have the steps correct, with one small part missing. You'll need to plug in your 4-way, run the power wire to the battery, and also attach the ground wire to install the 7-Way RV Upgrade Kit for Trailer Brake Controller…

view full answer...

Answer 7

You can put a maintenance charge on your trailer battery with the 12 volt accessory circuit of the 7-way. The 1:00 position of your 7-way carries this circuit. You would just need to run a length of 10 gauge wire like part #10-1-1 (sold by the foot),…

view full answer...

Answer 8

The Curt Echo Wireless Trailer Brake Controller #C51180 is not compatible with Apple CarPlay or Android Auto. There is a Manual Override Button #C83HR that is wireless and operates with a CR2016 battery. The nice thing about the Curt Echo is once you…

view full answer...

Answer 9

Hey Ron, The license plate light is typically spliced into the running light circuit so that it has power anytime the headlights are on. Since the Curt Custom Tail Light Wiring Kit for Towed Vehicles #C96JR would be just transferring your…

view full answer...

Answer 10

The wire connected to your 12V (1 o'clock) position on your 7-way should be connected to a 40 circuit breaker like #9510 and then to your vehicle's positive battery terminal using 10 gauge wire like #10-1-1. The 12V power at your trailer…

view full answer...

Answer 11

It is possible to use a 7-way vehicle end connector such as #PK12-707E to hook up to a stand-alone battery for your lights. You would need to connect by using 10 gauge wire, #10-2-1, and if you use a deep cell battery as you suggested, a pair of ring…

view full answer...

Answer 12

You can use a 7-Way and 4-Way connector at the same time just as long as you are not overloading the light circuits. If your camper has a lot of outside lights like running lights, and brake/stop/turn lights then the lights that perform the same…

view full answer...

Does 12V Pin on 7-way Trailer Connector Always Have Power

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching