Replacement Venture Landing Gear Box for VMC940RB

Updated 05/15/2025 | Published 06/23/2016

Products Featured in This Question

Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs

(194)

$737.55

Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies

(239)

$66.70

Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear

(142)

$81.79

Question:

looking for correct replacement for VMC940RB-055596 vmc gear reduction box

asked by: T. O

Expert Reply:

For your Venture landing gear you can use # LC276602 or # LG-179015. Either one will work.

expert reply by: Jameson C

Brandon S.

6/8/2020

Hi im looking for the replacement for a venture vmc94orb-257837

Chris R.

6/11/2020

If you're just looking for the gearbox the Lippert # LC276602 or Stromber Carlson # LG-179015 mentioned above will work perfectly.

Frank

6/30/2020

Looking for replacement for ventrue model vmc94vrb-157476

Chris R.

7/6/2020

The above mentioned gear boxes should work for your Venture setup as well - do they look the same as what you currently have?

Peter R.

7/14/2020

I have RV with Venture Mfg. landing leg #VMC940RB-181041. Right front location of trailer. The motor is running but the leg is not moving. Would this be gear box problem or other problem?

Chris R.

7/18/2020

It could be the gear box but it could also be damaged internal gears on the leg. Have you tried retracting the jack manually to see if it works? If it doesn't operate manually then it's likely internal gear damage. We do have a repair kit with part # LC146059 (lead leg) or # LC146060 (follow leg).

Peter R.

7/18/2020

@ChrisR It's the leg that's the problem. The worm gear at the top is damaged. The venture Mfg co serial number on top of leg is VMC900R-222467. Do you have one. The gear box and motor are working smooth. Peter R.

Chris R.

7/22/2020

@PeterR Based on that number the correct replacement legs would be part # LC119102 for the Lead Leg or part # LG-179014. I do still recommend verifying that the length and bracket spacing listed on the product pages match your existing leg.