Replacement Inner Bearing & Race for 2012 Keystone Cougar with Al-Ko T44 Axles

Question

Question:

I have a 2012 keystone cougar with AL KO T44 axles. I am looking for a an inner bearing AL-KO part # 363192 or Hayes 093705 the inner bearing cone is described as 68149. Is L68149 the same part? Thanks!

asked by: Scott

0

Expert Reply:

An AL-KO bearing K363192 corresponds to bearing part # L68149 and its matching race # L68111, as you noted. We offer these items and they are both linked to this email.

If you need a bearing packer, we offer several including the no-mess Powerbuilt # ALL647646 which can be used along with a grease gun like # PTW54290.

expert reply by: Adam R

0

Alan S.

8/19/2024

I am looking for a replacement bearing for my pop up the axle manual shows part number AL-KO 363180 or HAYES 093706 Can you help me with this Thx

Reply

Jesse M.

8/19/2024

@AlanS based on my research, the AL-KO 363180 is equivalent to the # L44649 bearing. This has a 1.063" Id, and it would be great if you could measure the ID of your bearing just to be 100% sure.

Reply

Answer 1

I've done some looking around online, and found that the #RG06-050 is the equivalent of the AL/KO 56886 or the Hayes #09103305. This is usually found on 3500 lb axles with the L68149 inner and L44649 outer bearings. I've linked you to our FAQ…

view full answer...

Answer 2

Nope. Your axle uses a different outer bearing and outer race than is included in the #BK2-100. There is no kit that includes all of the parts you need, but I have linked them all individually below: Inner Bearing #L68149 Inner Race #L68111 Outer…

view full answer...

Answer 3

Based on the measurements and bearing numbers you provided me. We have the individual parts you need. You'd want the bearing part #LM67048 and #L68149. Since the inner diameter of bearing #LM67048 is 1.250 inches and the inner diameter of bearing…

view full answer...

Answer 4

Hey Ken. The AL-KO T44 axle is obsolete and no parts have been made for it since 2015. I do not have a replacement hub for you. However, based on my research, the AL-KO T-44 axle spindle on your trailer uses the item #L68149 inner bearing and item…

view full answer...

Answer 5

Your Dexter D44 Axle number 635096 uses the Trailer Hub and Drum Assembly #8-407-5UC3-EZ that comes preloaded with the Races #LM67010 and #L68111. It does include the Bearings #L68149 and #LM67048, Grease Seal #58846, Grease Cap #21-42-1 and lug…

view full answer...

Answer 6

In order to find the correct grease seal and cap you will need to take some measurements since you cannot see a part number. I recommend using a digital caliper like the #PTW80157 to get accurate measurements. For the grease seal, you will need to…

view full answer...

Answer 7

Since you are only experiencing it on one side, it sounds like you may have bad bearings or maybe just a bad tire. Worst case, it could be a bent spindle. Normally alignment issues or axle issues would impact both sides of your trailer, so you'd…

view full answer...

Answer 8

We do have the exact bearings, races, and grease seal you need for your 4,400 lb Dexter axle, and while there isn't a single kit with the parts, you can get them all individually. What you will need are the following: Bearings #L68149 and…

view full answer...

Answer 9

The 4,400lb axles will share some of the same components as the 3,500lb axles. It is a good idea to check your sizes ahead of time to ensure you get the exact product that you need(see article and picture). Here is what we show fitting your 2021…

view full answer...

Answer 10

We have the individual parts you need but not as a kit. You'd want the bearing part #LM67048 and #L68149. Since this is not a standard bearing combination I would need to know more info to pick out the seal. I'd need to know the diameter of…

view full answer...

Answer 11

To measure for a grease cap you will need to use something that can provide a very accurate measurement such as dial or digital calipers. Then you will measure the diameter at the center of the hub where the grease cap will fit. Grease cap…

view full answer...

Answer 12

For the Dexter 4.4k axle we have the following bearing/seal parts available: Inner Bearing #L68149 Outer Bearing #LM67048 Seal #RG06-050 Inner Race #L68111 Outer Race #LM67010

view full answer...

Replacement Inner Bearing & Race for 2012 Keystone Cougar with Al-Ko T44 Axles

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching