Wheel Bearings and Seal for Travel Trailer with Dexter 4400 lb Axles
Updated 05/09/2018 | Published 05/07/2018
Products Featured in This Question
Question:
I have a 2013 Keystone Premier Travel trailer. It has dual Dexter 4400 lb axles. Only one tire, the front right is wearing bad on the inside. Suspension and axle look ok. I’m guessing and hoping it’s the wheel bearings? Any ideas and part numbers for a bearing/seal kit would be great. Sending pic of label on the axle.
asked by: Jason
Expert Reply:
Since you are only experiencing it on one side, it sounds like you may have bad bearings or maybe just a bad tire. Worst case, it could be a bent spindle. Normally alignment issues or axle issues would impact both sides of your trailer, so you'd have two tires with odd wear. If you have a slide out on that side, it may be loaded to heavy in that location which can cause that isolated increased tire wear.
The bearings you need for this axle are # LM67048 and # L68149. For a seal, you will need # RG06-050. If you want the replacement races # LM67010 and # L68111.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.38 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Availability of Bearing Kit for Dexter 4,400 lb Trailer Axle
- Q&A: 2021 Grand Design Travel Trailer Toy Hauler Axle Components
- Q&A: Recommended Bearings for a AL-KO T44 Axle
- Q&A: How to Measure a Hub to Determine the Right Grease Cap to Use
- Q&A: Availability Of Bearings/Races/Grease Seal For 3,500lb Al-Ko Axle On 2013 Keystone Cougar Link 215RB
- Q&A: Replacement Inner Bearing & Race for 2012 Keystone Cougar with Al-Ko T44 Axles
- Q&A: Replacement Bearing, Seals, and Races for ShoreLandr Boat Trailer
- Search Results: al ko 9012 hub
- Search Results: bearing dust cap
- Shop: Replacement Race for L68149 Bearing
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: Replacement Trailer Hub Bearing - LM67048
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Grease Cap, 2.44" OD Drive In with Plug - Qty 2
- Shop: 2-1/2" Lubed Dust Cap and Rubber Plug - 2.45" x 1.52" x 1.18" - Qty 1