Do You have a Generic Wiring Diagram for Installing a Brake Controller on a 2010 Dodge Ram

Question:

Hello, I bought this brake controller and downloaded the installation instructions. My truck is a 2010 Dodge Ram 1500. I had the trailer hitch installed at the dealership and have the 7 point wiring connector back by the hitch. I also watched your video on installation and did not find a quick connect blue plug for mine to plug into the brake controller underneath the dash ontop of the white box by the flooring. I called the dealership to inquire about this and they said they did not install a quick connector but the wires are there and are all taped up. I located a bunch of wires underneath the dash and am inquiring about a generic wiring diagram using butt connectors. Would you have a generic wiring diagram to show me how to hook this up to the wires underneath my dash? Primarily, what color wires goto whatever wires will come with the connector that comes with the brake controller.If not, where can I find one. Thanks for the info, Regards

asked by: John R

Expert Reply:

Yes, we do have a generic brake controller wiring diagram on our Brake Controller Information page. I have added a link to it below. The bundle of wires you are looking for should contain the following: white with red stripe, blue with white stripe, green with black stripe and blue.

You will match those 4 wires to the wires on the brake controller via the chart at the bottom of the page or the picture to the right that illustrates how the wires connect by color.

expert reply by: Patrick B