Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
We do have the B&B RV Water Center #BM58MR which is similar to the Valterra #A01-2004VP unit you found. It does have the brass check valve on the city water connection. The Check Valve #P23402LFVP you found is designed to attach in line…
view full answer...Hey Todd, yes the Solera 2000 Series and Edge Hardware part #LC65AF does come with two arms and the right hand side does have the drive motor but the wires do not come out of the top of the drive motor so you might email me a picture of what you…
view full answer...Hey Chynna, the Lippert Tread Lite steps part #LC353543 that you referenced is a complete step kit. It includes the motor, gear box, control module etc. Basically it comes with everything needed to complete the install.
view full answer...Since you are concerned about dips, RRs, and bumps in curves, I recommend using a shock absorber like #LC283271 or #LC281281 on your 5th wheel trailer. You stated the mounting hardware is already in place, so adding shock absorbers should be easy…
view full answer...There really isn't a particular maximum trailer weight that is used to determine when brakes need to be added to both axles of a tandem axle setup. While I do still recommend checking your local laws, I am also not aware of any general laws…
view full answer...The rule of thumb here in most cases is, the smoother the surface and glossier the paint, the shorter the nap. With the roof of the trailer being fairly smooth a 3/4" or less nap would be the better option. The manufacturer recommends a…
view full answer...Hey Ron! We have quite a few replacement options for RV steps and step components. If you could comment below with a part number off of yours I would be happy to check out what options we have. If you can't find a part number the manufacturer…
view full answer...Yes, we do! To replace the wiper blades on your 2021 Winnebago Sunstar 29V you will need the 32" Wiper Technologies Windshield Wiper Blade item #WPR47FR. This wiper is sold individually but it works for both the driver's and…
view full answer...The 10" x 2-1/4" Electric Brake Shoe/Lining #BP04-095 could possibly work, but I recommend going with the Replacement Shoe and Lining Kit for Manual Adjusting 10" Electric Brake Assembly #AKBRKR-S-10 instead because it is…
view full answer...Yes, I contacted Fan-Tastic Vent and the replacement lift arm part #FVK8011-05 fits vents with domed lids. If your vent has a flat lid then you need the lift arm for flat lids part #FVK8014-05. I have attached two photos that show the difference.
view full answer...The distance between the bolt holes for the Replacement Lift Arm #FVK8011-05 is 2-15/16" on center. The arm itself measures 6-5/8" long. I have attached some pictures for you to reference as well.
view full answer...On a 7-Way connector the suggested minimum wire gauge for the White (ground) wire, the Red or Black (power) wire, and the Blue (brake power) wire is 12 gauge. The minimum wire gauge for the remaining Green (right turn/brake) wire, the Yellow (left…
view full answer...Related Searches
Filter Your Search
Contact and Help