Instruction Manual for Tekonsha Podigy P2 # 90885 Brake Controller

Question

Question:

We just recently purchased a 2003 Lexus GX 470 which came with your 90085 brake controller proportional. We have no idea on how to use this device when towing a trailer. Do you have a manual available on how to use it?

asked by: Bill W

0

Expert Reply:

We sure do! I've linked you to a copy of the installation instructions which you can print out if you wish.

I've also linked you to our Brake Controller FAQ article, which includes much more information about brake controllers and how they operate.

expert reply by: Mike L

0

Dan F.

2/7/2020

We are looking for a Owners manual for Prodigy P2.I am not able to find online. Where would be the best place?I only find WordPress, but for some reason my Flash player will notallow it.Thank you

Reply

Jason S.

2/10/2020

I've linked the manual for the Prodigy P2 # 90885. It is the pdf so you should be able to open it without issue. If you still have issues then you may need to download a different pdf viewer. I've also attached the product page and we have so many videos that will walk you through all the features and installation.

Helpful Links

instructions.aspx?pn=90885

tv-Demo-Tekonsha-Brake-Controller-90885.aspx

tv-review-tekonsha-prodigy-p2-brake-controller-90885.aspx

Reply

Answer 1

I attached a chart that has the automotive cross reference for the Kodiak disc brake pads part #K2250CP that you referenced under the yellow heading. Probably the easiest to look up would be 1982 to 1992 Chevy Cavalier.

view full answer...

Answer 2

The Kodiak Ceramic Brake Pads #K2250CP are not shown on the cross reference chart you mentioned, but if you have the DBC-2250 calipers, these brake pads will work as a replacement. Check out the video linked below for more details on this product. If…

view full answer...

Answer 3

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 4

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 5

The easiest thing to use/install is the NightMinder RV Task Light #NM-Motion-011. This is a battery powered light that uses 3 AAA batteries (not included). All you need to do is get rechargeable batteries to avoid purchasing batteries constantly. It…

view full answer...

Answer 6

The Opti-Brite LED RV Dome Light #ILL29CFB has the typical bluish hue found on LED lights which would fall in the 6,000k range as far as temperature. Not purely white but just a little blue. The picture I attached shows you what color it exactly is.

view full answer...

Answer 7

The Fifth Wheel Trailer King Pin #337KP20050 is 2 inches diameter where the jaws of the 5th wheel hitch will connect. Typically the max wear on a king pin is .080 of an inch with a minimum diameter of 1.920 before manufacturers recommend replacement.…

view full answer...

Answer 8

There are two potential locations the port may be in your 2014 Ford F-150 to install the Plug-In Wiring Adapter for Electric Brake Controllers #22292. One is below your steering wheel column, above the pedals and the other is behind the panel that is…

view full answer...

Answer 9

Brake controller wiring harness #22292 plugs into the built-in connector beneath your vehicle's dashboard. To access this connector, first locate the instrument cluster finish panel in the center of you dash, near the driver's side. Carefully…

view full answer...

Answer 10

The Universal Wiring Kit #ETBC7 that you referenced is indeed what you need to install a fully functional 7-Way on your 1996 Isuzu Trooper so that you can install the Tekonsha Prodigy P2 Brake Controller #90885 to power the trailer's electric…

view full answer...

Answer 11

The wiring harness #3020-P used to plug in a trailer brake controller like the Tekonsha Prodigy P3 #90195 has a press-down release tab on both the vehicle and brake controller ends. You can see these tabs in the linked photo. You'll need to press…

view full answer...

Answer 12

The Replacement Suction Cup Mount #LC776462 is actually fairly simple to remove and then reinstall on the 4.3" monitor that comes with the Furrion Vision S System #FOS43TASF. To remove the base you'll need to pull the cup mount and the…

view full answer...

Instruction Manual for Tekonsha Podigy P2 # 90885 Brake Controller

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching