bing tracking image
  1. Trailer Tie Down Anchors
  2. Caliber
  3. D-Rings
  4. Universal
  5. Recessed Mount
  6. Bolt-On
Caliber D-Ring Anchor Kit - 5,000 lbs - Zinc - 2 D-Rings
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Caliber

Caliber D-Ring Anchor Kit - 5,000 lbs - Zinc - 2 D-Rings

Part Number: CA89VT
In Stock
$40.99
Retail:$65.21
You Save: 37%
Trailer Tie Down Anchors
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Videos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
This steel D-ring tie-down kit gives you a strong, secure anchor point for hauling cargo without getting in the way. The flush-mount design sits low to prevent interference, and each pack includes 2 rings with mounting hardware. Great Prices for the best trailer tie down anchors from Caliber. Caliber D-Ring Anchor Kit - 5,000 lbs - Zinc - 2 D-Rings part number CA89VT can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (6)
  • Q & A (0)
  • Videos (1)
  • Photos

Caliber Trailer Tie Down Anchors - CA89VT

  • D-Rings
  • Universal
  • Recessed Mount
  • Bolt-On
  • 5000 lbs
  • Zinc-Plated Steel
  • Caliber
  • Folding

This steel D-ring tie-down kit gives you a strong, secure anchor point for hauling cargo without getting in the way. The flush-mount design sits low to prevent interference, and each pack includes 2 rings with mounting hardware.


Highlights

  • Add Tie-Downs Where You Need Them: Flush-mount D-rings give your straps dedicated anchor points for securing vehicles, equipment, and cargo.
  • Secure Heavier Cargo: Each steel D-ring is rated for 5,000 lbs, giving you a strong connection point for your tie-downs.
  • Keep Your Floor Usable: Rings fold down close to the mounting surface when they're not needed, leaving more room for loading and hauling.
  • Reinforce the Mounting Area: Galvanized backer plates support the D-rings from behind instead of relying on the mounting surface alone.
  • Everything You Need to Mount Both: Kit includes 2 D-rings, backer plates, and stainless steel mounting hardware.

Strong Anchor without a Bulky Tie-Down

Close up of hands lifting Caliber D-Ring
The D-ring folds down close to the mounting surface when you're not using it, so you still have room to load equipment, roll gear across the floor, or use your trailer for something else. When it's time to tie something down, flip up the ring and hook on your strap.

Backer Plates Reinforce Your Mounting Points

Caliber D-Ring in use on trailer
A tie-down is only as useful as what it's mounted to. The included galvanized backer plates reinforce the mounting area from behind, while the stainless steel hardware secures each D-ring in place.

Specs

Quantity:

  • 2 D-rings

Capacity:

  • Load rating: 5,000 lbs per D-ring

Construction:

  • D-ring material: steel
  • D-ring finish: zinc plated
  • Mounting hardware: stainless steel
  • Backer plates: galvanized steel


13520 Caliber Zinc D-Ring Anchor Set - 2 D-Rings





Video of Caliber D-Ring Anchor Kit - 5,000 lbs - Zinc - 2 D-Rings
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Caliber Trailer Tie Down Anchors - D-Rings - CA89VT

Hello everybody, this is Jeff at etrailer. Today we're gonna take a look at the Caliber D-ring. anchor kit has a 5,000 pound rating, and this kit is for a quantity of two D-rings. Now this steel D-ring tiedown kit's gonna give you strong, secure anchor points for hauling cargo without getting in the way. The flush mount design of these will sit low to prevent interference. That includes two rings with all the mounting hardware and backing plates.

What's nice about the ring, if you noticed here, when you open it up and hook it up to operate it, it stays open. If you're not using it and you let it go, it's spring loaded so that the ring will help eliminate any noise. In other words, it holds it tight in there, so when you're driving and there's nothing hooked to it, it won't be vibrating around. That spring loaded holds it in place and again, it also works for putting it back in the flush position. It has, as we mentioned, has a 5,000 pound rating, supports heavy duty tie down applications.

These are a steel construction. Have a nice zink plated finish to help resist corrosion. Comes with the galvanized backing plates and stainless steel hardware are included for the installation. The size on this, the length of it this way is four inches. The width is three and three quarter inches wide.

Now if you do have any other additional questions regarding this part or any other item we carry, please feel free to reach out to us so that we can help you get all of your questions answered for you. But that is gonna do it for a look at the Caliber D-ring anchor kit at the 5,000 pound rating.

Ratings & Reviews

4.7

6 reviews
5 Stars
(5)
4 Stars
(0)
3 Stars
(1)
2 Stars
(0)
1 Star
(0)
Review Sort Icon
by:
The whole process went as planned. Delivery was exactly what they told me when I ordered. I will order from etrailer again
Thanks
Mike L. profile picture
Etrailer Expert

Mike L.

10/14/2026

You're very welcome Andrew, happy we could help and we appreciate your business!

by:
i needed to add these to my trailer , good and strong Anchors
by:
Received this and was shocked at the minimal potential for this set of D=rings to hold a 3500 race car in place inside an enclosed trailer. The bolts were thin and tiny, and not at all confidence building. I will not be using them.
by:
Thanks again
by:
by:
6
6
true

See what our Experts say about this Caliber Trailer Tie Down Anchors

  • Dimensions of Caliber D-Ring Anchor Kit part # CA89VT
    Hi Wayne, I went out to the warehouse and measured the Caliber D-Ring Anchor Kit part # CA89VT for you. The plate dimensions are 4" long by 3 3/4" wide and the inner diameter of the ring is 1 1/4" and outer diameter is 2 1/4". What are you planning on installing these D-rings on?
    view full answer...
  • Can The Caliber D-Rings Be Mounted Vertically On A Flatbed?
    Hello Matt, Thanks for writing in. Yes, you can mount the Caliber D-Ring Anchor Kit # CA89VT vertically on the side of your skirted flatbed. These are a universal mount, so mounting them vertically does not change the 5,000 lb capacity. You will just want to make sure you are mounting them to a solid structural portion of the flatbed and using the included backing plates. The D-ring is designed to pivot with the direction of the strap, so having the strap pull the ring into the fully...
    view full answer...

Do you have a question about this Trailer Tie Down Anchor?


Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Mary K
Edited by:
Mary K
Employee Sabrina W
Written by:
Sabrina W
Employee Kim H
Updated by:
Kim H

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.