Should Replacement Thule T2 Bike Rack Arm be Lubricated Before Installation

Question

Question:

I have ordered a new arm for my T2 rack and am wondering if some type of grease or lubricant should be placed on the bushing the arm clamps around. It appears there was something there now dried up from the factory but I dont want to use the wrong stuff and attract too much dirt.

asked by: Mike

1

Helpful Expert Reply:

The first thing you will want to do is clean off the dirty areas you mentioned. You will want to avoid spray lubricants like WD40 because they can attract dirt and clog up the works. Some light grease such as LubriMatic White Lithium grease in 14 oz. Cartridges # L11354 will work fine. Grease isn't a necessity, but you can use it.

expert reply by: Michael H

1

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

Hi Jerry, For your 2025 Kia Sorento PHEV you would need the Curt Trailer Hitch Receiver #C37RV for the trailer hitch. The right light kit for your Sorento is going to depend on a few factors. For models with the tow package, like you stated you have,…

view full answer...

Answer 4

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 5

Hey Jeff! You can use the Replacement Locking Ratchet Arm Assembly item #753-3579, you were looking at, to replace the arm on your 515-5190. It does have the length to handle 29" wheels.

view full answer...

Answer 6

Replacement Locking Ratchet Arm Assembly #753-3579 is the same one that originally came on your T2 bike rack so it would not offer any additional length. There is a longer one, #752-1272-001, which is 31-1/2 inches long overall which is about 2…

view full answer...

Answer 7

Hey Juerg, so it sounds like you have an older Thule T2 bike rack and a 29er bike which we have a solution for that with the part #753-3579 to replace the arm with one that is longer and will allow the larger wheel to be secured. That is a cool trick…

view full answer...

Answer 8

I spoke to my contact at Thule and she informed me that the problem you described would indicate that you have the older style T2 bike rack (older than 2012) which was not designed for use with the fat tire adapter part #TH919, but can easily be made…

view full answer...

Answer 9

Thanks for the pictures! Sorry to hear about your accident. The only way to replace the arm on the Thule Pro T2 XTR item #TH23JV is with the Replacement Spar Tube Assembly item #7524703002.

view full answer...

Answer 10

The replacement arm part #753-3579 is exactly what you need. This will convert your older Thule T2 bike rack to allow it to be used with the 29 inch wheel you have now.

view full answer...

Answer 11

If you have the older version of the Thule T2 Classic (pre 2012) then you can replace your ratcheting arms with part #752-1272-001 which has an overall length of 31-1/2" and will accommodate your 29" bike tires. If you check out the…

view full answer...

Should Replacement Thule T2 Bike Rack Arm be Lubricated Before Installation

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching