Customers compare TLL160RK to these similar products
Products Featured in this Video
Adam: Hi, everyone. Adam with etrailer.com. Today, we're going to be taking a look at Optronics trailer lights. So, we are going to have seven functions with these taillights. We are going to have our brake light, our running light. We do have a rear reflector.… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The edges of the CE Smith Post-Style Guide-Ons for Boat Trailers #CE27620 should in fact be painted for superior protection. You can simply use a spray paint from a local hardware / paint store, or for the best protection you can start off with…
view full answer...The CE Smith Post-Style Guide-Ons for Boat Trailers - 40" Tall - White - 1 Pair #CE27620 are made from durable 1-1/2" diameter steel posts, and while they're not designed to hold weight they were crafted with the potential…
view full answer...We certainly do have a 90 degree version, it's part #CE27608PG. The replacement upright doesn't include the mounting hardware, which is sold separately as part #CE11452-A.
view full answer...The replacement upright for your #CE27620 CE Smith 40" Post-Style Guide-Ons is #CE27608PG. The mounting hardware for the upright is #CE11452-A.
view full answer...The matching passenger side tail light for the Command #328-003-81LBM1 is part #328-003-81BM1.
view full answer...I think what you are going to have to do, since that step extends so far back on the trailer and the frame has an angle to it, is bolt the bracket to the top of the step rather than clamp it to the frame. So basically the post will be sandwiched…
view full answer...We do have Bearing Buddys with threads on them, but you'll need to verify fitment on your end: Stainless Steel - #BB1980T-SS fits a 1.980" hub bore Stainless Steel - #BB2080T-SS fits a 2.080" hub bore Stainless Steel - #BB2441T-SS fits…
view full answer...This Submersible LED Trailer Light Kit with 25 foot Wiring Harness, part #TLL9RK, uses all stainless steel mounting hardware. The mounting hardware of this trailer light kit should work well in the saltwater conditions that you use your boat in.
view full answer...The best way to determine the height needed is to measure from the top of your trailer frame to the top of the sides of your boat. If the 40" Tall Guide-Ons #CE27626 sit right at or slightly above the sides of your boat then the shorter will…
view full answer...Would you be able to send me some pictures of what your current lights look like and the triangular plugs that you mentioned so I can help you get something that works best?
view full answer...The B and W Flat Bed Fifth Wheel Hitch part #BWRVK3050 will set 10-1/2 inches above the deck height of the flat bed truck it is installed in. I attached a review video for this hitch for you to check out as well.
view full answer...The way that the 35 foot Wishbone 4-Way Trailer Wiring Harness, #A35W42B, works is instead of having 1 taillight wire (brown) that you would need to splice into in order to run to both taillights, this harness has two wires (one attached to each…
view full answer...