Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The Replacement Fat Tire Wheel Holder part #7521568001 was designed to accommodate fat tires but it works perfectly with non-fat tire bikes as well.
view full answer...Thanks for getting me the pictures of your Thule T2! From that I can tell you have the T2 Classic like #TH9044 and the correct wheel holder would be the part #7521568001. This would also work on the #TH9044-TH9046.
view full answer...I spoke with my contact at Swagman about a longer hitch pin for your XTC-2 #S64670. He said the longest hitch pin they offer is their locking anti-rattle hitch pin #S64029. This hitch pin with fit the thread and hitch pin hole on the 1/4 inch shank…
view full answer...I called and emailed JR Products multiple times with no response so instead of purchasing the Quick Links - 1/2" #37201345 I recommend going with the Curt Threaded Quick Link - 1/2" Diameter #C82932, which have a safe working weight…
view full answer...The Replacement Ratcheting Hook Set for Swagman XTC and XC Series Bike Carriers #P186 that you mention are designed to fit over the 1-1/8" x 1-1/8" upright masts on the Swagman XTC & XC series bike carriers. I wasn't…
view full answer...I think the bike rack you have is a Hollywood Racks Sport Rider but I could be wrong and there are a bunch of different sub-models as well. If you can find a model name or model number the best way to confirm the Replacement Frame Hook part…
view full answer...All of the bike racks you were looking at happen to be great options, but I would go with the Saris Freedom Bike Rack for 2 Bikes #SA4412B for your step through ebikes (Electra Townie and Magnum). This carrier is very lightweight at only 22.5 lbs,…
view full answer...Replacement Wheel Tray - Swagman Quad 2+2 2-Bike and 4-Bike Carrier - Outer Left/Inner Right #SQ1010 and Inner Left/Outer Right #SQ1011 both fit square tubing that has dimensions of 60mm by 60mm, or 2.36" by 2.36". Since you…
view full answer...I spoke with Furrion and found that this is a known issue with the wiring on the side marker cameras #FCE48TASL. A lot of people have been installing the trigger wire in with the power wire instead of running it to the turn signal or just capping…
view full answer...Because the Furrion monitor goes black it appears the camera either loses power or the monitor does when you shift into reverse. I recommend testing the wires using a circuit tester like #PTW2993 to check for power when shifted in reverse. The…
view full answer...Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…
view full answer...My favorite bike adapter bar is the part #UB01. We have found it to be the easiest to use, it has the widest range, and it has the best price. Using the adapter bar will be the best option for your setup so we would highly recommend it.
view full answer...Filter Your Search
Contact and Help