2012 Chevrolet Tahoe Roof Rack by Yakima
Roof Rack Includes:
Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2
SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4
Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 4
Part Numbers: Y00426,Y53TR,Y00221
Our Price: $688.80
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2
part number: Y00426
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
- Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit to create a complete roof rack
- Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
- Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
- Aero-style bars reduce drag to help maintain fuel efficiency
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Works with most universal-mount bike, water, snow, and cargo carriers
- Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
- Simply push down on the SmartFill strips to slide in accessories - no trimming required
- Bottom channels allow for easy installation on Yakima towers
- Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
- Etched measurements on bottoms of bars help center rack on your roof
- Lightweight aluminum bars are durable and rustproof
- Internal JetTruss extrusions provide exceptional bar strength
- Black powder coat finish is corrosion resistant
Specs:
- Quantity: 2 crossbars
- Crossbar weight capacity: 165 lbs
- Always observe your vehicle's maximum roof load capacity
- Dimensions: 60" long x 2-3/4" wide x 1-1/8" tall
- T-slot dimensions: 7/8" wide x 7/16" tall
- T-slot top opening: 7/16"
- Underbar slot: Full length
- Limited lifetime warranty
The quiet and aerodynamic Yakima JetStream crossbars let you build a custom roof rack for your vehicle. The crossbars require 4 Yakima BaseLine, RidgeLine, SkyLine, or TimberLine towers and a custom fit kit to mount the rack to your roof. Each bar extends past the towers to maximize space for mounting carriers and accessories. SmartFill strips push down for easy loading in the T-slots so there's no need to trim them. The bars are constructed of aluminum so they're durable and won't rust.
Aerodynamic JetFlow Design
The JetStream's asymmetrical JetFlow shape and built-in WindRidge helps to control air flow over and under the bar. This dramatically reduces wind noise and vibration - even at highway speeds - and eliminates the need to add a fairing to your roof rack. The aero-style bar also reduces drag to help maintain fuel efficiency.
Strong, Durable Construction
The JetStream crossbars are made of anodized aluminum with internal JetTruss extrusions. These extrusions strengthen the bars without significantly increasing their weight. Additionally, because the bars are aluminum and have a black powder coat finish, they won't rust or corrode so you can leave them on your roof year-round.
Hassle-Free Installation
Each JetStream crossbar has a bottom channel that allows you to mount it to any of the Yakima StreamLine towers - BaseLine, RidgeLine, SkyLine, or TimberLine. The rubber strip in the channel can be cut down to the exact size needed for installation and then re-installed in the channel. This helps keep dirt out of the bar and reduces wind noise.
Etched measurements along the bottom channel help you center the bar on your roof. Simply use the ruler on each end of the bar to ensure the towers are spaced properly in the channel.
Once you have the correct measurements, install the brackets in the bottom channel, set the bar on top of your towers, and tighten it in place with the torque tool (included with your towers).
Channel-Mounted and Clamp-On Accessories
JetStream crossbars have built-in top channels that allow you to carry channel-mounted accessories on your roof. Simply push down on the rubber SmartFill strips and slide your gear into the channel - no need to remove or cut the strip.
You can also attach most universal, clamp-on accessories and carriers to the bars.
Maximum Cargo Carrying Capacity
The JetStream is a full-length crossbar that extends past your Yakima towers. The increased length gives you more space to mount accessories and carriers to your roof rack.
8000426 Yakima Jet Stream Cross Bars - Aluminum - 60" Long - Qty 2 - Black
Item # Y00426
SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4
part number: Y53TR
Heavy-duty towers let you safely mount 2 Yakima crossbars to a vehicle with fixed mounting points, flush side rails, or a track system. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation.
Features:
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with fixed mounting points, flush side rails, or tracks
- Pair with 2 Yakima crossbars and Landing Pads to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter
- Easy, tool-free installation - just drop tower onto Landing Pad and close the cover
- Included torque tool clicks 3 times when crossbar is tightened to tower - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant die-cast aluminum, stainless steel, glass-reinforced plastic, and elastomer construction
Specs:
- Maximum tower load capacity: 165 lbs
- Limited lifetime warranty
The heavy-duty SkyLine towers allow you to mount 2 Yakima crossbars to your vehicle with fixed mounting points, flush side rails, or tracks. The towers adjust during installation to ensure your crossbars are level. The SkyLines' versatile BarBeds accommodate Yakima's full line of crossbars. The towers install with Yakima's Landing Pad system .
Versatile BarBed
The SkyLine's BarBed is specifically designed to work with Yakima's entire line of crossbars.
The BarBed is curved to accommodate the elliptical shape of the CoreBar and JetStream crossbar. The CoreBar includes brackets that slide over the bar and secure to the towers with bolts. The JetStream attaches directly to the tower with bolts.
The towers also work with Yakima RoundBars with adapters . The adapters slide over the bars and secure to the towers with bolts.
The crossbars mount to the SkyLine towers with the included torque tool. The tool clicks 3 times once you've reached the correct amount of torque so you don't have to worry about over- or under-tightening.
Simple Installation with Landing Pads
The towers install with custom-fit Landing Pads . To mount a tower simply open the cover, set the tower on the Landing Pad, and close the cover.
Mounting posts on the bottom of the tower extend when the cover is closed to lock the tower in place on the Landing Pad.
Each tower's pitch can be adjusted up to 6 degrees forward or backward during installation. This lets you create a level mounting surface for your gear even on a curved roof. Simply loosen the bolt near the top of the tower assembly, adjust the position of your bar, and then re-tighten the bolt.
Same Key System Locks
SkyLine towers are compatible with Yakima SKS lock cores (Y07204 - sold separately) that allow you to secure the roof rack to your roof. The SKS locks are all keyed alike so a single key opens all the locks. The locks can also be swapped out to make all of your Yakima products keyed alike.
8000163 Yakima Timber Line Roof Rack Towers for CoreBar, JetStream, and RoundBar Cross Bars - Raised Side Rails - Qty 2
Replaces 8000148
Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 4
part number: Y00221
Custom-fit Landing Pads allow you to attach SkyLine and Control Towers to vehicles with standard, C-shaped rack tracks. Mount to existing tracks and combine with SkyLine and Control Towers to create a base for an aftermarket roof-rack system.
Features:
- Provide mounting point for Yakima SkyLine and Control Towers
- Fit vehicles with C-shaped factory rack tracks
- Attach to factory tracks with anchor plates and screws
- Include snap-on covers for protection when Towers are not in place
Specs:
- Quantity: 4 pads
- Lifetime warranty
8000221 Landing Pad 1 for Yakima Control or Sky Line Towers
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Arrived Damaged
Customer Reviews
Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 - Y00426
SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 - Y53TR
Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 - Y00221
Average Customer Rating: 4.8 out of 5 stars (700 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity. Heavy-duty towers let you safely mount 2 Yakima crossbars to a vehicle with fixed mounting points, flush side rails, or a track system. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation. Custom-fit Landing Pads allow you to attach SkyLine and Control Towers to vehicles with standard, C-shaped rack tracks. Mount to existing tracks and combine with SkyLine and Control Towers to create a base for an aftermarket roof-rack system.by: See11/03/2022
with so many variables having someone that could sort through all them was very helpful Thanks etrailer
by: Frank02/10/2023
Not a bad setup. I dont believe you need the 60" bars i received as they hang over the edge of your Hyundai. You need to watch your head getting in and out of your vehicle. The Jetstream crossbars are very loud at speeds over 65 mph. Im probably used to it by now, but it is definitely noticeable. Much louder than an older Rhino Rack of similar dimensions i had. Install was simple and took about 30 minutes, just take your time and measure correctly like all roof racks.
by: Rob04/19/2023
Honestly, I love etrailer. I love the expert help that you all provide. It's clear by the 1 year follow-ups that you care more about the relationships with your customers then just making a sale. Your service is friendly, informative and fast. I always come here first to look for my next purchase. Thanks again-Rob.
by: Doug02/16/2022
First trip with the new rail system and it looks like it worked out just fine. Thanks to both of you and Kimberly for all of your help and follow up I do appreciate it.
Doug
2/18/2023
Ive had the rail system on my truck for about a year now and its been a tremendous help. It allows me to still use my bed and provides much needed extra storage space, mostly for all the dog items we carrycrates, gates, beds, food, etc. I like the fact the rail locks to the truck so I dont need to remove them at home or at our destination.
by: Nelson06/26/2023
It was what it was advertised and fit perfectly on my 2023 Ford Maverick
by: Layne 02/11/2024
2022 Ram 3500
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
by: Elliott08/04/2018
2015 Jeep Grand Cherokee
I have a 2015 Jeep Grand Cherokee SRT which has the non-functional roof side bars. Etrailer.com helped me figure this out and gave me several options that would work. As I already have Yakima bike racks - I wanted to stick with the brand. The price on etrailer.com was the same as Yakima but had free shipping and no tax - awesome. Product arrived quickly!
I went with the Yakima 60" Jetstream cross bars, baseline towers, and the appropriate pads and clips.
The Yakima product came with thorough and easy to understand instructions. I was able to get the track installed and working in about an hour - and that was taking it slow and double checking everything. I was very pleased with the fit and finish.
After a test run, there was no wind noise or issue with the rack. Looking forward to taking a road trip next month with it!
by: Rod12/05/2021
Product exactly as expected. Quality bars. Using on a 2021 Jeep Grand Cherokee L. Looks great installed. Little to no wind noise. And, as usual, top notch service by the etrailer crew! Have purchased several items from etrailer over the past 10 years and have always been impressed by how timely they are and how responsive and helpful they have been regarding product questions. They are absolutely the first merchant I go to when shopping on line!
by: John 08/31/2017
2015 Ford Fusion
The Yakima rack system for my 2015 Ford Fusion is an awesome product! I hadn't needed to buy aftermarket racks in many years. These are a super solid, beefy, and very well made product. I am very impressed with the quality and fit. Yakima has obviously put lots of design time into them. And etrailer does an outstanding job of making sure you get the right product for your specific need.
I chose this rack specifically because of the spread between the bars - 32" - and for the higher weight limit, as I'm carrying a fishing kayak.
by: John11/16/2023
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
by: Andrew04/04/2023
2001 Ford F-350, 450, and 550 Cab and Chassis
Easy to order and quick to ship. Took a bit of time to get these installed correctly so they fit just right.
by: Bryan03/27/2024
Very nice and heavy duty. They don’t look too fragile on a lifted truck with oversized tires.
by: Michael01/22/2023
2019 Mercedes-Benz E-Class
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
by: Frank P.03/06/2016
Fit good with the OE track on roof. I like the new covers they supplied with the mounts.
by: Bob L11/30/2023
product was just what I needed The folks at etrailer were extremely helpufl!!
by: DogDoc04/12/2024
2024 Ford Expedition
Easy to install. It probably took 45min. I bought them for my 2024 Expedition to haul a canoe. I have not done that yet but I expect no issues.
by: William02/28/2024
You guys provide great products and excellent customer service.
Thanks
by: Ryan. K05/25/2020
Very sturdy hold with a matte look and fine textured feel. Very light making for easy install.
by: Joseph08/23/2021
Pontiac Trans Sport Van
1 year later and still love my Yakima JetStream system. I've mostly used them to transport my kayak however I've also been able to transport some big box store items as well. They are very versatile. There is a t-track option as well as wrap around attachments. I've use ladder attachments, eyebolts, and Thule Hullavator in t-track. I've used Malone MegaWing and Yakima Skybox as wrap around attachment. What I really like about the t-track system is that you do not need to cut out the rubber track insert. You simply slide over the rubber, which allows you to adjust your system, on the fly, to load what you need to carry.
by: Chad12/07/2018
Excellent product. These bars are very quiet and look great on our truck. Assembly and installation was straightforward. We've used these bars to secure our large Yakima car top carrier and have traveled on several trips to the mountains and cabin with no issues. I suggest ordering an extra set of end caps as we've lost one in the car wash. However, have had no problems with the bars when going through the car wash.
As always, I GREATLY appreciate the superior product support that etrailer.com provides. They have the best product content on the web, hands down.
by: Aaron 02/10/2024
Perfect match
by: Hogan06/09/2023
I’ve placed 2 separate orders with etrailer in the last 6 weeks. Their service, response, pricing and follow-through have been terrific each time. I will use them every chance I get.
by: Earthdog Mom05/11/2023
Quality product, timely shipping, transported with care. Packaging received fully intact with no damage.
Thank you etrailer for yet another great ordering experience!
by: Pat G08/29/2013
Great first experience dealing with you guys! Shipped fast, and was a faster install. You gave me the right parts and it went together in a flash.
Will definitely be doing business with you all again.
by: Daryl04/29/2020
These Yakima crossbars are a part of the Yakima towers I bought to install on my Jeep Cherokee to hold a pair of Kayaks. They fit great as advertised. In fact I got these discounted as an open box. I would have never known, they look brand new. Thank you etrailer for your great advice, customer service and quick shipping process.
25
640
Show More Reviews Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?
- Will Older Thule Hullavator Work With Yakima JetStream Roof Rack on 2019 Subaru Outback
- Your older Thule Hullavator 897XT will work with the Yakima JetStream crossbars for your 2019 Subaru Outback. The T-slot on the JetStream bars are 1" wide x 1/2" tall, which is actually slightly larger than the T-slot on the AeroBlade bars so you won't have any issues fitting the Hullavator into that T-slot.
As for the length of the bars, I do recommend using the 60" Yakima JetStream Crossbars # Y00426 to ensure you have the needed space to use your Hullavator.
The rest of the parts
view full answer... - Crossbar Recommendation For A 2021 Jeep Grand Cherokee W/ A Naked Roof
- For your 2021 Jeep Grand Cherokee, I recommend checking out the:
-Yakima JetStream Crossbars # Y00426, with the BaseLine Towers for Yakima Crossbars # Y28TR, and two sets of the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06121.
These crossbars have a maximum weight capacity of 165-lbs, measure 60" long x 3-1/8" wide x 1" tall, and have built-in WindRidges that help control air flow over bars to dramatically reduce wind noise and vibration.
view full answer... - Recommended Roof Rack And Lift-Assist Kayak Carrier For A 2024 Ford Bronco
- For a 2024 Ford Bronco with raised rails I recommend the Yakima JetStream Crossbars # Y00426 along with the TimberLine Towers for Yakima Crossbars # Y33TR. These feet have straps to easily mount on your Bronco's raised rails and will allow you to meet the spread of a lift assist kayak carrier like the Thule Hullavator Pro Kayak Roof Rack and Lift Assist w/ Tie-Downs # TH898.
view full answer... - Roof Rack Recommend for 2016 Honda CR-V to be Transferred to Truck Camper Shell
- I can definitely help you out with getting the most parts that will transfer over from your 2016 Honda CR-V!
The Yakima roof rack is the way to go since it uses the longer 60" bars as they should transfer over to your truck cab nicely. The only problem is that the legs used for the naked roof on your CR-V won't be compatible with a track system so you will need to get new legs and a different fit kit for the tracks on your truck. A lot of truck camper shells do come with a track system
view full answer... - Recommended Roof Rack And Canoe Carrier For 2012 Ford F-150 SuperCrew Cab
- The Yakima JetStream Roof Rack will work well on your 2012 F-150 SuperCrew. This roof rack includes the JetStream crossbars # Y00426, BaseLine towers # Y28TR, and fit kit # Y06168 designed for your F-150. To help cut down on the wind noise I recommend a fairing like part # Y05018. This attached to the front crossbar and has rubber bumpers that protect the truck finish.
To secure the canoe to the crossbars I recommend the Thule Portage Canoe Carrier, part # TH819. This system attaches
view full answer... - Long Crossbar Roof Rack Recommendation for 2020 Honda Pilot with Naked Roof
- For your 2020 Honda Pilot with a naked roof the roof rack we have with the longest crossbars is the Yakima Jetstream rack part # Y00426, # Y28TR, and # Y06152. This gives aerodynamically shaped bars that are 60 inches length which will work really great on your 2020 Honda Pilot.
I attached a picture of what this looks like installed as well as an install video as well.
view full answer... - Roof Rack for 2021 Jeep Grand Cherokee with Black Rails that Run Front to Back
- Rhino Rack has a roof rack that is a fit for your 2021 Jeep Grand Cherokee that has the matte black roof rails that run front to back with the part numbers # RRVA137B-2, # RRRLKVA, and # DK234. This is one of the nicest and quietest roof racks out there so it will work really well for you.
view full answer... - Recommended Roof Rack for a 2023 Acura MDX w/ a Bare Roof
- To add a set of Yakima Jetstream crossbars to the bare roof of your 2023 Acura MDX you will need the following parts:
Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06163
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06178
This aero bar roof rack system has a 165 lbs capacity.
view full answer... - Recommended Roof Rack For a 2023 Ford Bronco 4-Door With Raised Roof Rails
- I recommend using the Yakima JetStream Crossbars # Y00426 with their Towers # Y33TR on your 4-door 2023 Ford Bronco. This rack uses aero crossbars which feature an integrated t-track for adding accessories. The Yakima Same Key System (SKS) Lock Cores # Y07208 will provide you with 8 lock cores which you can use on the towers and other Yakima compatible roof accessories. These will allow you to secure the rack and your gear to the roof rack.
view full answer... - Recommended Roof Rack for a 2022 Ford Maverick w/ a Naked Roof
- To add a roof rack to the naked roof on your 2022 Ford Maverick, I recommend the roof rack by Yakima and it includes the following parts:
Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06180
This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204
view full answer... - Roof Rack for 2004 Toyota 4Runner to Carry Yakima Showdown Kayak Carrier
- The Yakima Jetstream roof rack part numbers # Y00426 and # Y00147 that fits your 2004 Toyota 4Runner would do a great job carrying the Yakima Showdown part # Y04081.
The Jetstream is very aerodynamic which helps with wind noise, is easy to install, and is one of the highest quality roof racks out there so you'll be very happy with it.
view full answer... - Recommended Roof Rack for 2019 VW Atlas With Raised Side Rails
- For your 2019 VW Atlas with raised side rails I highly recommend going with an option from Yakima, which consists of the Yakima Jetstream Crossbars # Y00426 and TimberLine Towers for Yakima Crossbars # Y33TR.
This will give you a roof rack which not only looks great but uses aero bars with ridges that helps give you a very quiet ride. The bars are 60" long to fit the width of your Atlas and have T-slots which will allow you to use channel-mounting accessories.
I also recommend using
view full answer... - Roof Rack Recommendation for a 2021 Jeep Grand Cherokee with Flush Matte Black Rails
- We do have some roof rack solutions for your 2021 Jeep Grand Cherokee with the matte black flush rails. They mount via clamps in the door jamb (just as if you didn't have any rails) so if you're wanting a roof rack that mounts directly to those rails you will need to swap it out for something different.
The clamp mounting is perfectly safe so I personally wouldn't change out the rails. For your current setup I recommend picking up the Yakima JetStream system which includes the following:
view full answer... - Compatibility of Thule Upride Bike Rack with Yakima JetStream Roof Rack Crossbars
- The dimensions of the T-slot are consistent between Thule, Yakima, Rhino Rack, Inno, Malone and most of the other major players. Your Thule accessories that are designed to mount in the slot or channel in the top of the crossbar will indeed be compatible with the Yakima 60 inch # Y00426 crossbars. Yakima confirms that the 60 inch crossbar along with the # Y33TR TimberLine towers will indeed work on your 2012 Toyota 4Runner Trail.
I've linked you to our Roof Rack help articles.
view full answer... - What Are the Dimensions of Yakima JetStream Crossbars
- The Yakima JetStream Crossbars like the # Y00426, which are Yakima's aero style crossbars, are 3-1/8" wide x 1" tall.
view full answer... - Roof Rack Tracks & Crossbars For 2014 Dodge Grand Caravan
- So what you can do is install tracks on the top of your 2014 Dodge Grand Caravan and then install the roof rack system in those tracks. You'll need to measure to find the right length of tracks, as well as the correct crossbar width, but here's exactly what you'll need:
- Yakima Tracks for Roof Racks - 42" Long # Y01126, 54" Long # Y01127, or 60" Long # Y01135
- Landing Pad 1 # Y00221 (You'll need to order Qty 2 of this part number)
- SkyLine Towers for Yakima Crossbars # Y53TR
-
view full answer... - Recommended Kayak Carrier and Crossbars for a 2005 Jeep Grand Cherokee
- For your 2005 Jeep Grand Cherokee using the Yakima JetStream Crossbars # Y00426 and the TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR I recommend going with the Malone MegaWing Fishing Kayak Roof Rack w/ Tie-Downs # MPG207.
Reason being, the MegaWing has a larger weight capacity at 150-lbs compared to the 75-lbs max of the SeaWing # MPG107MD, is only a half a pound heavier, and has a longer load strap at 15' compared to the SeaWing's 11' straps.
The positioning
view full answer... - JetStream Yakima Roof Rack that Fits 2019 Volvo XC90
- Yakima replaced the Whispbar roof rack line with their JetStream rack line which for your 2019 Volvo XC90 you'd need the # Y00426 and # Y33TR.
Since all of the Whispbar line has been discontinued there isn't a way to get replacement parts for it.
view full answer... - Which Yakima Landing Pads for 2021 Toyota Highlander to Mount Skyline Towers
- To use the Yakima Skyline Towers # Y53TR on your 2021 Toyota Highlander the correct landing pads are the Landing Pad 28 for Skyline and Control Towers # Y66VR.
view full answer... - Can I Use the 60-Inch Yakima JetStream Crossbars to Use My Hullavator on My 2021 Toyota Highlander?
- If you are looking at the JetStream crossbar system for your 2021 Toyota Highlander Hybrid with flush rails, you are correct that you need the SkyLine Towers # Y53TR, Landing Pad 28 # Y66VR, and Lock Cores # Y07204. These etrailer part numbers correspond to the Yakima part numbers you mentioned. However, the JetStream Crossbars 8459629 did not come up with a matching etrailer part number. However, if you are looking for 60-inch bars, those are # Y00426. While Yakima recommends 50-inch crossbars
view full answer... - Yakima HD Crossbar Rack For Retrax Pro XR Tonneau Cover
- You'll need an adapter but yes, the Yakima HD crossbars will work with the Retrax Pro XR tonneau cover. What you can use is the following:
- Yakima HD Crossbars - 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure to get the correct length
- Landing Pad 1 # Y00221 (you'll need to order Qty 2 of this part number)
- SkyLine Towers for Yakima Crossbars # Y53TR
- HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03541
view full answer... - Parts to Make a Rhino Rack Vortex bars fit with Snugtop Roof Rack Rails
- The setup you need for your track system on your SnugTop which is made by Yakima will consist of four components.
part # Y53TR SkyLine Towers for Yakima Crossbars Track Systems
part # Y00221 Landing Pad 1 for Yakima Control Towers
part # Y00422 Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2
part # Y07204 Yakima Same Key System (SKS) Lock Cores (QTY 4)
These components will allow you to attach any roof mounted accessories you may want.
view full answer... - How to Order Yakima HardTop Roof Rack without Roof Tracks
- You'd need two sets of the Landing Pad 1 # Y00221, the 60 inch CoreBars # Y00422, and SkyLine Towers # Y53TR and you'd have everything the discontinued Y01618 has without the tracks.
view full answer... - Yakima Roof Rack System For Flush Rails On A 2021 Toyota Rav4
- I understand how it can be overwhelming at first, but that's why I'm here! I do like the Yakima Skyline Towers # Y53TR so definitely get those. The Skyline towers need to mount to what they call a Landing Pad. For your 2021 Toyota Rav4 you need the Landing Pad 23 # Y98FR. The landing pad will use a threaded hole inside your tracks to secure it to your vehicle and the Skyline towers will connect to that!
As far as bars go, the longest crossbar length kitted for your 2021 Toyota Rav4 is
view full answer... - Yakima Roof Rack for 2022 Subaru Legacy
- You are on point with Yakima being a really high-quality product so I completely understand wanting to stick with them for a roof rack on your 2022 Subaru Legacy. The Yakima roof rack that fits your Legacy consists of the following parts:
- Yakima JetStream Crossbars # Y00425
- SkyLine Towers for Yakima Crossbars # Y53TR
- Landing Pad 22 for Yakima Towers # Y00248
- Same Key System Lock Cores (Optional) # Y07204
I have added links to video reviews for you to check out as well.
view full answer... - Replacement Yakima Towers Needed For Custom Install of Jetstream Cross Bars On A.R.E. Topper
- You will need the SkyLine Towers for Yakima Crossbars, # Y53TR for a set of 4 or, # 8880614 for 1 each.
view full answer... - Do Yakima Core Bars fit Thule Tracks on Leer Cap
- A Yakima rack with CoreBars is compatible with the Thule tracks on the Leer cap of your 2016 Toyota Tacoma.
To install the rack, you would need the following parts:
Two of the Landing Pad 1 for Yakima Control Towers # Y00221
SkyLine Towers for Yakima Crossbars # Y53TR
The Yakima CoreBars you need would depend on the width of your Leer cap; your options are Yakima CoreBar Crossbars 50" Long # Y00421
Yakima CoreBar Crossbars 60" Long # Y00422
Yakima CoreBar Crossbars 70" Long
view full answer... - How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3
- Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
view full answer... - Parts Needed to Add Roof Rack to 2004 Ford Escape With Factory Tracks
- We have all the parts you need to add a roof rack to your 2004 Ford Escape, and I think the best option is a round bar system from Yakima because of its value. It is both a quality rack and cost-effective so I strongly recommend it; the rack is made up of the following parts:
- Round 48" CrossBars for Yakima Roof Rack # Y00408
- Yakima SkyLine Towers # Y53TR
- RoundBar SL Adapter # Y03536
- Landing Pad 1 for Yakima Control Towers # Y00221
view full answer... - Parts Needed to Install Round Bar Yakima Roof Rack on 2019 Toyota Tacoma
- I can help you install the Yakima round bars you have on your 2019 Toyota Tacoma but Yakima actually no longer uses the Q Tower racks so the Q clips aren't available anymore and were never tested on your truck. So what you'd need is the # Y53TR for the towers, # Y03536 for the roundbar adapter, and Landing Pad 24 # Y74FR since you already have bars like the # Y00408.
view full answer... - Can Yakima Rail Grab Lock Cores be Swapped into Skyline Towers
- If you unlock the Yakima cores you can use the change key part # Y8007835 to remove the cores from the old rack and then install them into the Skyline towers # Y53TR. Yakima hasn't changed their lock core design so this would work easily.
view full answer... - Parts Needed to Order 70 inch Yakima Jetstream Roof Rack for 2016 Subaru Outback
- To do a 70 inch Yakima Jetstream roof rack on your 2016 Subaru Outback Wagon with the flush rail crossbar setup you'd need the Skyline Towers part # Y53TR, the fit kit # Y00241 and the crossbars # Y00427.
view full answer... - Fit Kit for Installing Yakima Legs on Thule Tracks for 2022 Toyota Tacoma
- Thanks for reaching out!
If you have the SkyLine Towers for Yakima Crossbars # Y53TR then all you need is 2 sets of the Landing Pad 26 # Y75ZR and you're set. If you have a different leg kit then you need the SkyLine towers to accomplish this as the other Yakima legs are for different installation types.
view full answer... - Can the Yakima SkyRise Tent Be Used on a 2011 Honda CR-V
- According to the owner's manual for your 2011 Honda CR-V, the roof has a weight capacity of 165 lbs. Therefore, you can use a Yakima SkyRise Tent on your CR-V without any issues as it meets the minimum weight capacity requirement of 165 lbs. The Yakima SkyRise does have a 60 lb weight capacity but since the ladder will support much of the weight, the roof rack/vehicle only needs to be rated for 165 bs.
In order to use the Yakima SkyRise on your CR-V you will also need an aftermarket
view full answer... - How to Carry Cargo on 2014 Mercedes Benz E-350 Coupe with 2 Doors
- If you are looking to carry cargo or bike racks on a 2014 Mercedes-Benz E-350 the best option is going to be to install a roof rack because the only hitches available are for a '14 E-350 are for a sedan or wagon. The good news is that you can install a roof rack whether or not you have the Panorama Roof as it will attach to fixed mounting points on your Mercedes.
I highly recommend going with a roof rack option from Yakima because it will give your 2014 Mercedes E-350 coupe a roof rack
view full answer... - Roof Rack for Camper Shell and Roof of 2020 Chevy Silverado 1500
- You can then use the Yakima roof rack with landing pad 1 part # Y00221, two of the control towers # Y8890027, and the single crossbar # Y8810025.
Then for a single bar rack for the roof of your 2020 Chevy Silverado 1500 you'd want the part # RRVA150B, # RRRLKVAH, and # DK427H and you'd be set.
view full answer... - What Parts Are Needed To Make Low-Profile Bed Rack System For 2022 Ford F-150 w/ RetraxPro Cover
- Looks like you are pretty much there!
The Landing pad 1 # Y00221, Skyline Towers # Y53TR, and 68" Yakima HD crossbars # Y01158 will all work perfectly with the RetraxPro XR rails on your 2022 Ford F-150.
This would be perfect for carrying bike racks with a rack like # TH598004-FB, or a platform like the # Y05045-39 but it would be pretty hard to carry kayaks or canoes with this style of rack as you would have a ton of overhang past the bed which is less than ideal.
For a kayak
view full answer... - Yakima Round Bar Complete Roof Rack System With Tracks
- You can piece together a round bar system that is going to be similar to a Yakima roof rack with round bars and a track system. What you will need are the following parts:
- Yakima 54" Tracks for Roof Racks # Y01127
- Yakima Control Tower # Y8890027 (Quantity of 4)
- Landing Pad 1 for Yakima Control Towers # Y00221 (Quantity of 2)
- Round 58" CrossBars for Yakima Roof Rack System # Y00409
OR Round 66" CrossBars for Yakima Roof Rack System # Y00410
This will give you a track-based
view full answer... - How To Mount Yakima Towers In Retrax Tonneau Cover Tracks
- If you have the Yakima Skyline or Control Towers then you can use the Landing Pad 1 for Yakima SkyLine and Control Towers part # Y00221 to mount them into tracks/channels like those found on select Retrax Tonneau Covers.
view full answer... - Roof Rack for 2008 Fleetwood Niagara Pop Up Camper with Factory Track System
- I did some research on your 2008 Fleetwood Niagara Pop Up Camper and it appears that most of the major roof rack manufacturers (Thule/Yakima/Rhino-Rack) have systems that will work with the factory tracks you have on the roof of your popup camper. One of the most cost effective options we have for you is from Yakima in their round bar system. This system is composed of the fit kit part # Y00221(2), mounting feet part # Y8890027 (4), and crossbars part # Y8810027 (2). Please keep in mind
view full answer... - Replacement T-Slot Nuts & Bolts Hardware For Yakima Landing Pad 1
- To mount Yakima SkyLine towers in your UltraGroove the foot pack is the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221, and the correct replacement hardware with the T-slot nuts and bolts for this foot pack is the following:
- Replacement Hardware Bag for Yakima Landing Pad 1 # Y8890028
You'll need a quantity of two of the # Y8890028 for all four feet.
view full answer... - Which Yakima Landing Pad Fits Truxedo Elevate Ladder Rack Rail
- You are correct, it is the Yakima Landing Pad 1 part # Y00221 that is compatible with the Truxedo Elevate TS rails.
view full answer... - Roof Rack for Leer Cap With Factory Tracks on 2015 Ram 1500
- You can absolutely get a roof rack for the factory tracks of the Leer cap on your 2015 Ram 1500. I have spoken about this exact issue with Yakima and they have told me the exact parts you need for a roof rack on your truck cap, which is the following:
- Landing Pad 1 for Yakima Control Towers # Y00221 (Quantity of 2)
- SkyLine Towers for Yakima Crossbars # Y53TR
Crossbars (the correct length will depend on how wide the tracks are on your Leer cap, so just be sure to measure and then
view full answer... - Recommended Roof Rack And Canoe Carrier For 2009 Ford F-150 With ARE Camper With Yakima Roof Tracks
- We have just what you need to put a rack and canoe carrier on your 2009 F-150 with the ARE camper.
First you will need 2 pairs of the Landing Pad 1 for Yakima Control Towers, part # Y00221.
Then you need the SkyLine Towers for Yakima Crossbars, part # Y53TR.
For crossbars you can take a quick measurement to make sure you get the right length for your camper. For 60-inch I recommend part # Y00422. If you want 70-inch you will need part # Y00423.
I also recommend the Yakima
view full answer... - Yakima Roof Rack Components Needed to Install Roof Rack in Pace Tonneau
- I spoke with my contact at Yakima and he told me that you will need the part numbers # Y00221 (quantity of 2), and part # Y8890027 (quantity 4) for the feet and then crossbars # Y00409 to complete a rack in the Pace rails of your tonneau.
view full answer... - Is Yakima Landing Pad 1 Used for Yakima Roof Rack on a 1996 Ford Explorer
- Yes, the Landing Pad 1 # Y00221 is for your 1996 Ford Explorer.
You will use 2 sets of these with the SkyLine Towers # Y53TR so you can mount crossbars like the 50" JetStream Crossbars # Y00425 on your Explorer.
view full answer... - How to Use Yakima Round Crossbars with a Set of Rhino-Rack RTC-Style Roof Rack Tracks
- There are adapters for the Rhino-Rack Quick Mount Legs part # RRRLT600 that will allow you to use square crossbars but not round crossbars. If you can tell me what you are trying to do or what you have/need I would be happy to see if we have any other options for you.
view full answer... - Yakima Towers Needed to Mount to Landing Pad 1 on Track System
- It looks like you have the Yakima Landing Pad 1 for Yakima Control Towers # Y00221 on your A.R.E. Canopy, so I recommend using the Skyline Towers for Yakima Crossbars # Y53TR. These towers will allow you to choose between the Jetstream # Y00426 (60" long) / # Y00427 (70" long), the Yakima CoreBar # Y00422 (60" long)/ # Y00423 or use Round bars like the Yakima # Y00410 with the adapter # Y03536. These towers are not compatible with square bars that you had asked about in a previous question.
If
view full answer... - Parts Needed to Install Yakima Roof Rack in ARE Truck Camper Shell Tracks
- I spoke to my Yakima contact and he informed me that you will need the Landing Pad 1 # Y00221 for the tracks on your ARE camper.
To complete your roof rack setup you will need:
quantity 2 of the Landing Pad 1 # Y00221
quantity 4 of the Control Towers # Y8890027
and depending on the width of your cap
quantity 2 Crossbars like:
48 inch # Y00408
58 inch # Y00409
66 inch # Y00410
78 inch # Y00411
view full answer... - Is the Mounting Hardware for the Landing Pads for Yakima Control Towers Part # Y00221 Included
- The mounting hardware that is needed to install the Landing Pads for Yakima Control Towers part # Y00221 is included therefore no additional purchase will be necessary. I have attached a photo that shows everything that is included in the kit above for you as well.
view full answer... - Dimension of Mounting Hole Spacing of Yakima Landing Pad 1 #Y00221
- I was able to go out to the warehouse and measure the Yakima Landing Pad 1 for you and found that the mounting hole spacing is 3-15/16 inches from center to center.
I have linked a picture and the part to this page for your convenience.
view full answer... - What is the Difference Between Yakima Landing Pads 1 and 4
- The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles.
view full answer... - Adding Crossbars to an ARE Camper Shell with Tracks
- I believe your ARE camper shell has Yakima tracks installed but it doesn't really matter which brand you have as most of them will accept each others mounting feet. However, Yakima has the most cost effective option for you so I recommend using the landing pads part # Y00221 (2), control tower part # Y8890027 (4), and crossbars part # Y8810025 (2). The round crossbars are cut to fit. This is the most inexpensive option we have for you to add crossbars to your ARE camper shell.
view full answer... - Parts Needed to Install Yakima Roof Rack in Channel on Truck Camper Shell
- The Yakima Landing Pad 1 part # Y00221 is the correct fit kit to allow you to install a Yakima roof rack in the channels of your camper shell.
You do have to remove the end caps of the tracks to be able to install the square nuts that slide into the channel and hold the rack in place. You'd need a quantity of 2 of these fit kits though for both bars.
You'll also need:
quantity 4 of the Control Towers # Y8890027
and depending on the length of your cap
quantity 2 Crossbars like:
view full answer... - What Parts do I Need to Install My Yakima RoundBars on My Truck Topper on My 2021 Toyota Tacoma?
- If you already have Yakima Round Bars like the # Y00408, the parts you need to attach the crossbars to the tracks are 4 of the Replacement Yakima Control Tower for Factory-installed Tracks # Y8890027 and 2 sets of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221.
For the tracks themselves, they come in 3 different sizes:
- Yakima 42" Tracks for Roof Racks # Y01126
- Yakima 54" Tracks for Roof Racks # Y26RR
- Yakima 60" Tracks for Roof Racks # Y01135
Since most
view full answer...
Yakima Accessories
Fit to this rack on your 2012 Chevrolet Tahoe
Info for these parts were:
Video Edited:
Zack K
Video Edited:
Dustin K
Written by:
Tyler C
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Jeffrey L
Video by:
Joshua S
Updated by:
Wilson B
Updated by:
Jenny M
Updated by:
Alex H
Updated by:
Michael B
Updated by:
Noah M
Installed by:
David F
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ralph C.
11/6/2023
Great had a few Hic-Ups getting the correct set E-Trailer reps were all over it and got me going Great Company to work with