Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # C55329
Retail:$59.33
Our Price: $32.95
You Save: 44%
Confirmed to Fit
2000 Dodge Ram Pickup
Pickup without factory trailer connector
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (86)
- Q & A (0)
- Photos
2000 Dodge Ram Pickup - Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit
- Trailer Hitch Wiring
- 4 Flat
- No Converter
- CURT
Quickly and easily install a 4-way trailer connector on your Dodge Ram Pickup with this custom harness. T-connector plugs directly into existing wiring - no cutting, splicing or tapping required.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily - no cutting or splicing of wires
- Locate connection points behind rear bumper
- Plug in T-connector
- Comes with dust cap for 4-way flat connector
- Limited 1-year warranty
Installation
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the rear bumper, on the driver's and passenger's sides.
Once installation is complete, the 4-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
55329 CURT T-Connector - 4 Wire
Installation Details
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Product did not meet expectations
Customer Reviews
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - C55329
Average Customer Rating: 5.0 out of 5 stars (86 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting, splicing or tapping required.by: Mike 04/27/2024
Easy plug and play!! Fit perfect!
by: Jim12/04/2023
Bolted right up. Clear instructions
by: Brian 02/20/2024
Easy to install, biggest problem was me trying to figure it out. Works as advertised
by: Missouri01/16/2023
Product was wired incorrectly from factory. The turn signal wires on the harness were reversed when trailer harness was hooked up. Fixed by creating a pig-tail and reversed the turn signal wires on that one.
by: Jonathan 01/03/2024
Easy to install. Plug 'n play..
by: Jerome 01/06/2020
The wiring harness went together nicely.
The left trailer light worked intermittently. However, it worked OK with my car towing lights... So the problem apparently is with my trailer wiring.
Thanks for the links below to instructions, etc.
by: Jeff C08/11/2015
1998 Dodge Dakota
Shipping box didn't fare well but Curt receiver hitch survived with no damage during shipping. Product was exactly what I expected and is solidly built. Install only took thirty minutes and all holes lined up perfectly. Hardest part was getting out rusted bolts on 98 Dodge Dakota. Glad I didn't go with Uhaul.
Jeffrey C.
8/10/2016
Still hauling strong.
by: Clilfford07/05/2023
Great product, and excellent service and super nice people to do business with. I highly recommend this product and company. 5 STARS ACROSS THE BOARD ON EVERYTHING THEY HAVE DONE FOR ME.
by: William Mayhew 10/11/2019
The product was an easy install just as they said. The wiring was also simple to install. It works perfectly and also increases the value of my truck because it’s equipped to haul trailers or campers with an taillight / brake lights hook up.
I was very impressed with this and will definitely contact etrailer again if I need anything else.
by: Michael G.06/02/2016
2015 DodgeRam Pickup
The Curt T connector wiring harness I ordered from etrailer.com worked great. It plugged directly into the existing brake light connectors at the back of my 2001 Dodge Ram 1500. The only problem I had was getting the old connectors loose from 15 years of dirt and debris buildup. But as soon as those were loose the Curt T connector slid in effortlessly. Thanks etrailer!
by: Richard05/29/2019
2001 DodgeRam Pickup
So far things have been great with boat & trailer. Its very easy to load & unload and handles well on the road, even though I've only driven it from my house to the dock we have here in the community . Got lights going, went in very easily and all lights work. Only been out in boat twice as the weather down here is awful....13 straight days in the mid 90's so there isn't much incentive to do any fishing right now. Stay in the air condition !!!
by: Brian Lockeman09/17/2014
Spend the extra money and buy the T-connector, it took me 10 min to install.Save your self from the frustration from the ones you buy at the big box stores.
Brian L.
9/17/2015
Great
by: Tim K09/03/2016
1995 Dodge Dakota
Product looks solid and delivered in timely manner. Interaction with etrailer has been surprisingly personal (for a ".Com" transaction), and their followup very professional. Due to pavement still being hot enough to cook on here in FL, I have not installed yet, so I will comment later on the how well the product matches my frame and it's durability. So for now, I have no reason for any less than 5 stars.
by: JR04/08/2014
1995 Dodge Dakota
This thing was a snap, literally, to put on. I installed it on a 1995 Dodge Dakota. If I had suggestions for improve it to make it even more awesome, I'd say put a small label on each side of the wiring harness for "driver side" and "passenger side". I haven't yet hooked a trailer up to it but I don't see any reason it wouldn't work - it's well made.
by: Mickey B04/20/2017
2001 DodgeRam Pickup
Trailer wiring harness was easy to install. All connectors fit perfectly. Works like a factory install.
by: Gene C07/28/2017
Hitch and tail light harness arrived in three days. Installed everything yesterday in about an hour, took extra time to round up tools and figure out how to do it by myself. Excellent fit...probably took about 20 minutes to install hitch...held it in position will hydraulic jack.
by: John 10/13/2019
2001 Chevrolet Silverado 1500
With the help of Ms. Paula, I ordered and received, in a appropriate time, my wiring harness for my 2001 Dodge Ran 1500 truck. I am extremely satisfied with each and every aspect of my order and product. It had very clear directions as how to install and it was right on point. Also had plenty of extra wire so you didn't have to be concerned if you had enough wiring to reach each side. I couldn't be happier and I'm very thankful to Ms. Paula for her assistance!!!
by: Chris W08/20/2014
2003 Dodge Dakota
This was the first hitch I ever installed. It took me, by myself, 45 minutes to install. This includes the lighting harness as well that I purchased. Everything matched up perfectly. Very pleased. highly recommend
by: C5532904/13/2017
Thanks etrailer it's just what I needed. I bought a trailer w/lights & had no where to plug them in. Now I can pull my trailer safe & legal. It took only 10 min. to install. Thanks again
by: Chuck08/15/2020
10 minute install including wash up. Would help if connectors were tagged right and left. Not everyone knows that green is right and yellow is left.
by: Rob B08/16/2016
1998 Dodge Dakota
Plug and Play wire harness! Very easy to install. Appears to be of good quality.
by: Ed 02/20/2017
Easy install. Only took minutes. Harness worked great. No problem with lights
by: Jan 09/14/2020
1998 DodgeRam Pickup
Easy to install except the old connectors were hard to unclip!
by: Nelson07/12/2018
2001 DodgeRam Pickup
Like to say thank you the T connector worked great fast shipping and great packing
by: Pete D.03/10/2017
This is a great product, I ordered it and five days later it arrived. Only took me about 10 minutes to install it in a school parking lot.
25
86
Show More Reviews
See what our Experts say about this CURT Custom Fit Vehicle Wiring
- Recommended Trailer Wiring Harness for 2001 Dodge DakotaFor your 2001 Dodge Dakota, the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118329 is a confirmed fit. Another option is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C55329 which is also a confirmed fit. Either of these options will plug into your Dodge Dakota's wiring harness, which is located at the rear, along the inside of the frame rail on both the driver's and passenger's sides. I recommend using mounting bracket...
view full answer... - Troubleshooting No Reverse Lights on 2003 Dodge Dakota I haven't, Steve. All of the trailer wiring for a 2003 Dakota like # 118329 is plug and play so there wouldn't be a need to physically run another wire. I did some research though, and the only other thing I could find was that If a trailer has more than 1 taillight per side then you'd need to use a ModuLite® or dealer supplied harness, per Dodge. Since you're not getting reverse lights, I'd recommend checking the fuse box first to see if there may have been a fuse blown. If there has...
view full answer... - How To Install the Curt Hitch C13145 on a 2003 Dodge Dakota SportYes, you will need to remove one existing bolt on your driver side frame rail in order to install the Curt Trailer Hitch Receiver part # C13145 or any trailer hitch for that matter on your 2003 Dodge Dakota Sport. In regards to your spare tire, this will not need to be removed or lowered to perform the install whereas most others do require this. As you mentioned, this trailer hitch is a no drill option for all 97-04 models. For a trailer wiring harness, I highly recommend the Curt T-Connector...
view full answer... - Recommended Trailer Hitch That Is Least Visible On 1994 Dodge DakotaThe trailer hitch I recommend for your 1994 Dakota with the least visibility is the Curt Trailer Hitch Receiver, part # C13145. This trailer hitch is designed with the receiver tube even with the horizontal bar of the hitch. Most hitches have the receiver tube welded below the bar, making it more visible. None of the aftermarket hitches will be completely hidden as they are mounted below the truck frame but this hitch is the least visible of the hitches we offer. If you plan on doing...
view full answer... - Recommended 7-Way Connector and Brake Controller for a 1996 Dodge Ram w/out Factory Connectors To install a 7-Way harness on your 1996 Dodge Ram without the factory connector, you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector Item # C55329. This custom-fit T-connector plugs into your Dodge's wiring harness, which is located behind the rear bumper, on the driver's and passenger's sides. This will provide you with a 4-flat connector. The...
view full answer... - Recommended 7-Way Connector for a 2001 Dodge Ram Since your 2001 Dodge Ram 1500 didn't come with any factory wiring you will need two separate wiring harnesses to add a 7-Way connector to your truck. The first harness you will need is the Curt T-Connector item # C55329. This harness is custom fit and plugs into your existing wiring behind your Ram's rear bumper. It will provide you with a 4-flat connector. The second harness you will need is the Universal Installation Kit item # ETBC7. The kit includes a pre-wired 7- and 4-way trailer...
view full answer... - Bumper and Hitch Recommendation for a 1995 Dodge DakotaThere aren't any safety chain loops on the Westin Fey Bumper part # 63000-97800. Safety chains would be better attached to a hitch. For a hitch for your 1995 Dodge Dakota that has safety chain loops you would want the Curt Class III Hitch part # C13280. For trailer wiring you would want the Curt Harness part # C55329. For ball mounts I recommend the etrailer Ball Mount Kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag.
view full answer... - Completing Brake Controller Output Circuit on a 1998 Dodge RamThe easiest way to install your brake controller is going to be to run the blue wire of the controller back to the 7-way with ten gauge wire like our part # 10-1-1 (sold by the foot). Trying to track down factory wiring on the older Dodge trucks can be a bit of a headache and this will bypass all of this. Or you could use just the # C51500 that comes with the wiring you would need to hardwire the brake controller to your vehicle. This comes with power and ground wires for the controller,...
view full answer... - Parts Needed to Install Trailer Wiring on 2001 Dodge Ram without Tow PackageYour truck does not have the factory tow package wiring so you'd need to go a different route to complete the trailer wiring. You'd need the 4-way kit part # C55329 to provide the trailer wiring and then you'd need to convert to a 7-way with the part # 37185 for if you don't have a trailer with brakes or the part # ETBC7 for if the trailer does have brakes with a brake controller like the Brake EVN # TK63VR.
view full answer... - Is Drilling Required to Install Curt Class III Trailer Hitch Receiver # C13280 on 2001 Dodge DakotaThe Curt Class III Trailer Hitch Receiver, # C13280, is a custom fit hitch and offers bolt-on installation for your 2001 Dodge Dakota. No drilling or welding will be required. I have included an installation video for you. I'm assuming that you plan to do some towing with your Dakota so I have included an article that covers the steps to choosing the correct ball mount for your set-up. You might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a...
view full answer... - What is the Differences Between TowReady T-One # 118329 and Curt # C55329 Wiring HarnessesThe two products you compare, 4-pole trailer wiring harnesses # 118329 and # C55329, are functionally the same and connect to your 1999 Dodge Dakota in exactly the same way. Both take stop/tail/turn light signals from your Dakota and through plug-in connectors that attach underneath the vehicle deliver these lighting signals to your trailer. Both are equipped with a flat 4-pole trailer connector.
view full answer... - What do I Need to Add a 7-way and a Brake Controller to my 2001 Dodge Ram 1500We have exactly what you will need and a video to show you exactly how to do it!! You want to start by adding a 4-way trailer connector using the Curt T-Connector Vehicle Wiring Harness part # C55329 this can easily be ran up behind each tail light and gives you the starting point to add your 7-way to using the Universal Installation Kit for Trailer Brake Controller part # ETBC7. This gives you a 7-way and a 4-way so it is very adaptable. The kit also includes the wiring to run to the...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Edited by:
Leah B
Video by:
Andrew K
Video by:
Joshua S
Written by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Test Fit:
Nicholas E
Test Fit:
Shane T
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jerome
1/7/2021
It fit and installed like it should. I have not used it much, but it looks durable, so I expect it to last.