Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the wireless remote fob for your Air Lift WirelessONE air compressor system (AL25980 or AL25980EZ).
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, compressor owners. Today, we're gonna be taking a look at Air Lift's replacement remote for their WirelessONE compressor system. And this'll be compatible with your WirelessONE compressor or the WirelessONE EZ, which is the one we're gonna be pairing it with today. Now, if you've lost your remote, you still will be able to function the compressor using the app with your phone. But I know a lot of people like to keep this in their car just in case, you never know when you might just need to run out there and adjust it and run off and you don't have your phone charged or whatever. So to get this guy paired up to your existing system, the first thing we need to do is put it into pair mode.
To put your system into pair mode, we're going to remove the fuse for our system. Leave it out for just a couple of seconds and then we'll re-insert the fuse. Once the system is powered back up, it'll be in pair mode for about five minutes, it's just a few minutes it'll let us be in pair mode. So now we've got that in. We'll press a button on our remote and it should now try to detect any nearby systems.
And there we go, it shows devices. It can pull up a number there. The number is gonna be unique to your particular system. But I know based on the app that I've got paired to it, this is the right one. So we're gonna go ahead and select it.
This is also the only one in nearby range of our remote, so it's the only one that it could detect. And our pairing was successful. So we'll just see here. We're gonna go ahead and hit preset one, and that sets it to 20 pounds. Our compressor kicks on, so it looks like we are all ready to go.
Now we don't have any load in here, so I'm just gonna hit the button to put it back to preset one, bringing it back down to five pounds for unloaded. There's a couple of additional features we can show you here with the remote. It does have two presets with these two buttons and you can also get a third preset by pressing down both buttons. That's our preset three. There's a menu that you can access as well by pressing the up and down arrow. This is where you can select your device. 'Cause let's say maybe you got a new truck and you installed the WirelessONE and you still got your remote here, you wanna pair it to that other system. Maybe you sold the truck and the compressor was still on there, but you got the remote. You can unpair this in the devices menu here. Being able to access the devices and unpair, it's also really nice in a fleet scenario 'cause oftentimes you've got a bunch of guys running around and these remotes can get mixed up and then it's not working 'cause it's paired to the wrong truck. So you can quickly unpair it and then just re-pair it with the same procedure we showed you here to get this working with that particular truck. Now, if you're here because you think your remote's broken, it could just be that the batteries are dead inside. To open the remote up to replace the batteries, we'll take our small, flat-bladed screwdriver and we're gonna put it in the bottom here and we're just gonna kind of give it a little bit of a twist and there, it's gonna pop up. We can then just pull it apart and we'll see our two batteries inside there. A CR 2032 battery, the positive will face up and you'll just stack them on top of one another. Once you've got your new batteries installed, it just clips right back together. Hold, press the button and it powers up. So there you go. You can check that yourself and replace the batteries, but if you're still having an issue, we've got these available here. And that completes our look at Air Lift's replacement remote for the WirelessONE compressor system..
Average Customer Rating: 4.7 out of 5 stars (68 Customer Reviews)
Replaces the wireless remote fob for your Air Lift WirelessONE air compressor system (AL25980 or AL25980EZ).So far no luck to get it to program up to the air lift system. I can only use the system because of the app I have on my cell phone.
Lost my original remote while loading up from a trip. Ordered a replacement from etrailer and had it within a week. Could have had it sooner but just went with the standard shipping. Took less than a minute to sync it to my Air Lift wireless one system and I am back in business.
excellent fast shipping perfect product
The best thing for leveling out your vehicle while hauling a trailer. I have bought a few of these for friends and family. I swear by it!
Great company great prices and communication, I couldn’t be any happier Thanks again!!
The lifts always do the jib and the hand-held remote is fantastic!!
I have only used etrailer a few times but I have not had a bad experience. On this particular order I tried somewhere else first and got the run-around for 2 months, without any progress I cancelled my order. I re-ordered on etrailer and had my part in 5 days, all the while being able to track it and see when to expect it.
Great service thus far, I will definitely use them again
Lost mine while I was camping and contacted etrailer and immediately sent me one out thank you so very much it was fast plus pairing it with my system was so easy
Easy to pair the replacement remote to the air bag compressor. Same procedure for pairing the App on your phone. Thanks for the video and very quick delivery!
Would not connect to my wireless airlift
I am very happy with my air lift system. I accidentally lost my remote. I ordered another one and they were very helpful with the reprogramming. I would highly recommend
Arrived quickly with clear instructions to pair with the manifold on my compressor. Couldn't ask for a better product or service.
Just like the original, and included a battery and very easy to follow instructions. Simple replacement for my original which I left on my bumper when hitching up :(
Just like the original unit. Caution: don't ever set the controller on the bumper of your truck! I drove over mine when I forgot to pick it back up!
Work great!!!
Fast shipping and product works great. Easy to use and program.
Works exactly as described. I broke my old one and this one was the perfect replacement.
Easy to program, once the fuse location is found.
Works great
Good to know that a replacement for the remote control is available as when the Control is not attached to the visor it is likely to be mislayed and lost.
The controller arrived packaged safe and secure. Great instructions for programming.
Only issue was finding the correct fuse to pull on my setup, once that was found rest was a cakewalk.
Good product and even better customer service with product knowledge and professionalism.
This product is exactly as described. Well packaged. Super fast shipping.
Perfect oem replacement (of which as soon as this arrived I found the one I thought I lost). Now I have an extra if needed.
Only place I could find a replacement. Great price, fast shipping
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
5/24/2024
I know that this remote is meant to be used for the WirelessONE compressor models # AL25980 or # AL25980EZ. I see that you had previously bought the Bluetooth WirelessAIR system part # AL58WQ in the past. If you wanted to use the remote with this system then I hate to say that it will not work with it. The Bluetooth system does not have a remote that works with it, only with the mobile phone app. I hope that this helps.