Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…
A junction box/7-way plug kit like Epicord #277-000141 or #HS381-9000 lets you convert the camper to match the 7-way RV blade type connector format. This avoids the extra connection points and potential trouble spots from using separate adapters.…
For a 12,000 lb. electric car trailer winch like the Bulldog Winch Trailer Winch part #BDW10040, I recommend a standard 12 volt lead acid battery rated up to at least 650 cold cranking amps (CCA). As long as the battery is rated up to 650 CCA then…
Not at all, Kate! The Rich Solar RV Solar Charging Kit w/ 2 Panels - 12V - 400 Watts #RS97VR is ideal for bus life. It’s a great match for a 200Ah lithium setup, with headroom for adding an inverter or third battery later if you decide to do so. The…
From what I could find it looks like a Lance 975 slide-in camper is 19-1/2' long so the Camco UltraGuard #CAM45770 for 18' campers isn't quite long enough. The Camco UltraGuard #CAM45773 is designed or 19-1/2' campers but you'll…
The coin tray on the dash of your 2017 Ford E-450 can be simply pried out with a slot screwdriver. You can gently insert the screwdriver between the tray and the dash piece that surrounds it. You will then pry the tray out. Just be sure to apply…
The Bulldog Winch Snatch Block #BDW20049 does not technically have a minimum wire size, but it does have a maximum wire diameter of 3/8". This would likely work fine with your 5/32" wire #BDW20102, however, a more appropriate snatch block…
There's crossover; the 15123 and LM67048 have the same inner diameter, so they fit the same spindle, and often hubs fit both 5,200 lb and 6,000 lb axles. So you are perfectly okay with what you have and the correct replacement bearing kit for…
Good question. The Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 2,000 lbs part #DL14725 is rated to hold 58 feet of 9/32" cable. That cable has a diameter is 3 times that of what you intend to use on it with the 3/16.…
Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs and…
I reached out to my contact at Dutton-Lainson and she said that there is not a ratcheting handle available that's compatible with the DL1402A model Hand Winch #DL15303. For one that can be used with a ratcheting handle a higher-rated winch is…
The socket/drill adapter part #DL6456 that you referenced only fits worm gear style winches like the #DL11011 from Dutton Lainson and would not fit the winch part #DL14725.
