The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
Hey Fred, I checked with Blue Ox just now and our Blue Ox base plate kit part #BLU77ER is a confirmed fit for your 2025 Ford Ranger and would work great. Do you have a Blue Ox tow bar already?
I wish we could help but we don't have an online version of the ecohitch instructions we can share. This does come with them but EcoHitch is very protective about their intellectual property so they don't do digital versions. With that said…
Yes, it does Ray. The Shocker 5th Wheel to Gooseneck & Demco Lock Coupler item #SHK89YR has 3" of offset compared to a standard gooseneck pin box like item #GY45GR. This pin box also has a built-in air spring and bump stops that absorb road…
Hello Andrew, Well that sounds like quite the fun trip, what state or states will you be traveling through? You're asking a really important question, especially since you're planning a cross-country trip with about 250 pounds of bikes and…
Hello Andrea, thanks for reaching out. We do indeed offer a trailer hitch for the 2024 Hyundai Tucson N-Line Hybrid. The correct hitch is the following: - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C94WR The #C94WR is a Class III…
Hi Stephanie! Great question and you’re totally right to ask, because most hitches for the 2024 RAV4 do require a bit of bumper trimming. That includes the Oris Detachable Hitch #TS66VR, since it uses a hidden design that needs a hole cut in the…
Hello Joe, thanks for reaching out. Any aftermarket hitch you add to your 2025 Toyota RAV4 XSE is going to potentially interfere with the lift gate sensor. In some cases, the sensor will still work if you wave your foot on either side of the…
Yes, the Reese Goose Box #RP94716-61301 is the correct Goose Box for the Lippert 1116 pin box. I have included a link to the installation details for you to view.
The mounting bracket to actually attach the Hood Latch #PLR284 to the vehicle is included but the keeper end bracket (to secure the latch) is not. This can be added with part #PLR281.
Filters
