2009 GMC Van Cargo Mat

The custom fit VanRug made for your 2015 Sprinter 2500 with 144in wheelbase is VanRug Custom Floor Mat for Cargo Vans - Charcoal Gray - Carpet #VRMS06M. It is designed for the cargo Sprinter Van and extends from behind front seats to under cargo…

There is a trailer hitch receiver that fits your 2024 Mercedes-Benz Sprinter 2500, made by Curt. The correct part number is the following: - Curt Trailer Hitch Receiver #C13388

The best way to test your Redarc Tow-Pro Elite #RED44FR or Liberty #RED52VR brake controller is by cutting the blue wire coming out of it about 6" away from the controller and using a circuit tester to make sure power is coming out of the…

For your Sprinter 2500, I recommend the Curt Trailer Hitch Receiver #13358 that will do a great job for your bike carrier and more should you decide to tow later. This hitch model is designed for either the 144" or 170" wheelbase…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

On your 2018 Ford Focus the Roadmaster Battery Disconnect with Switch #RM-766 can only be used on the positive terminal of the battery as that is what the polarity of the solenoid is designed for, per Roadmaster.

The reason some ball mounts have different lengths is simply to allow for more clearance between the tow vehicle and trailer. Some people like a longer ball mount if, for example, they want to be able to open the tailgate of their truck when the…

It sounds like you are needing to install a 7-Way connector at the rear of your 2005 Ford E-150. If your Ford Van did not come with the factory tow package (with a 7-way connector), then there will not be a built in socket or harness under the…

We do have floor mat options for your 1998 Ford E-350. I recommend going with the VanTred because it gives you better protection with the thermoplastic material as opposed to the standard carpet protection: Standard Wheelbase - #VTRF92 Extended…

The VanTred by BedRug part #VTRF92 is a confirmed fit for your 2014 Ford E-350 standard wheel base and would work just fine. The pictures show a cargo style van but it will also fit your van.

The Curt hitch part #13358 is recessed under the step bumper like you can see in the attached picture but it's not recessed to the point it wouldn't work well. It wouldn't interfere with the camera setup either.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…