2019 Ford Transit Connect etrailer Trailer Hitch Receiver: Complete Installation Video

According to the owners manual for your 2016 Ford Transit Connect Titanium LWB you have a maximum towing capacity of 2,000lbs with or without trailer brakes. You will also need to ensure the added tongue weight does not cause your Transit to exceed…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Pam, thanks for reaching out to us! I recommend going with the etrailer Trailer Hitch Receiver #e77AR for your 2020 Ford Transit Connect because it has a matte black finish that is more durable than the standard glossy black finish on other…

There is just a single difference between the Curt and etrailer trailer hitches that fit your 2023 Ford Transit Connect, which is the finish. The Curt has a glossier finish than the matte black finish of the etrailer hitch, so you can choose which…

I'm happy to tell you there is no drilling whatsoever required to install the etrailer trailer hitch onto your 2023 Ford Transit Connect; the correct part number for your van is the following: - etrailer Trailer Hitch Receiver #e77AR This is a…

Many of the 4-pole trailer wiring kits we sell will install at the vehicle's tail lights. The harness connectors on such kits install in between the vehicle plugs and the tail lights themselves. For the 2014 Ford Transit Connect we have three…

In order to install a 7-way trailer connector and brake controller on a 2012 Ford F-150 you will first want to start with a 4-way trailer connector, the Replacement OEM Wiring Harness for Ford F-150 part #C56110 which is plug and play. Once we have…

I attached a diagram that shows how to match all of the wire colors of the Hopkins Multi-Tow 7-Way Blade and 4-Way Flat Trailer Connector #HM11141144 to the wire colors on your 2017 GMC Canyon.

The Brophy D-Ring Tie Down Anchor w Backing Plate - Bolt-On - 1/2" Wide - Recessed - 1,600 lbs #RR5K are rated for 5,000 lbs break strength and will work just fine with your application. The 3/4 inch plywood floor is very strong and with the…

If you connect the trailer brake light circuit to the trailer brake circuit your brakes would lock up immediately since 12 volts is max braking voltage for trailer brakes. You'd need a brake controller that can vary voltage so that you can apply…

I apologize for any confusion on what the proper torque specs are for 1/2 inch lug nuts on trailer wheels. I attached a picture of a chart to the right that details what the proper torque specs are for a trailer wheels lugs based on lug size, wheel…

Going by the colors that you mentioned, it sounds like you have the typical set-up, green wire for right turn and brake, white wire for ground, yellow wire for left turn and brake, brown with green wire for right side running lights, and brown with…