Custom Fit 2021 Dodge Durango Accessories

Hey Candelario, The Curt TruTrack 2P Weight Distribution System w/ Sway Control #C69JR only has a 2" channel and the shank of the Curt Alumalite Aluminum Adjustable 2-Ball Mount #C33ZJ you were looking at is 2-1/2" wide so it would be too…

You are correct that the Curt TruTrack 2P Weight Distribution System w/ Sway Control #C69JR comes with a 2-5/16" hitch ball but it is not pre-installed. This is something directly from Curt and while we aren't able to pre-torque hitch balls…

Hi Emily, Before buying anything you'll want to verify that both the Pilot and the trailer hitch installed on it are rated for use with a weight distribution hitch (WDH). From what I can see Honda does not recommend it because it can shift the…

Yes, we do have a hitch receiver for your 2021 Dodge Durango and it has a subtle appearance compared to other hitches. It is the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV- 2" item #DT38MR. This hitch installs behind your…

Using a Weight Distribution (WD) system that is rated too high or too low is never a good thing. Too high and your ride will be very stiff but too low and you won't see any benefit from it. Luckily we have a solution for you that does not require…

We do have a really nice option for a weight distribution hitch that is perfect for your Rockwood Roo 233S, though the Husky system is no longer available. What you want for the most effective weight distribution hitch is a system where your loaded…

This bracket fits a very specific type of 7 and 4-way so I'd have to see what your OEM plug looks like. Does it look like the picture I attached?

I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver part #DT38MR for the 2020 Dodge Durango that allows the knock out panel to be replaced when the hitch is not in use. I have attached an installation video on a 2019 Dodge Durango but the…

My favorite trailer hitch for your 2019 Dodge Durango is the Draw Tite part #DT38MR because it installs behind the rear fascia cut out designed for a hitch so that when not in use you can cover it. See picture. I attached an install video for this…

The OE skirt cladding would be an extra plastic panel that runs along the bottom of the door threshold. It runs front to back between the wheels under the doors. If you don't have this, or are ok with removing it, you can use the #27-6630-1975. I…

Absolutely! For your 2021 Dodge Durango we have the Draw-Tite Trailer Hitch #DT38MR which installs in a manner making it able to be completely invisible by reinstalling the small cover on the center of your bumper. This hitch has a massive 900lb…

It's a plastic cladding that runs along the bottom of the door threshold area basically. If there was a plastic section that ran the distance between the wheel wells below the doors that would be the skirt cladding. There normally is a black…