Hey Scott, yes the hardware that comes with the Replacement Track Adapter Installation Hardware for Yakima OverHaul HD #Y69KR would fit into the tonneau cover tracks that you have on your 2020 Ford F-350 with the Embark tonneau. This kit will not…
As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…
Hey Matt, so the biggest difference between the Hellwig and Roadmaster sway bars that fit your 2022 Ford F-350 is the diameter of them which is what directly influences how stiff they are. The Hellwigs are a smaller diameter than the Roadmaster so…
The two parts you mentioned (#RP87FR and #RP39FR) that fit your 2021 Ford F-350 Super Duty will both allow the ability to pull a gooseneck trailer with a gooseneck ball or use a 5th wheel hitch in the puck system. The only difference between them is…
Hey Don, yes the Torklift camper tie down set part #TL54VV is correct for your 2022 Ford F-350 long bed that has the OEM trailer hitch. This actually comes with the fishwire bolt leaders so you wouldn't need to supply those separately.
The Dexter Kodiak Disc Brakes #KOD67VR have a brake mounting flange with more of a squared bolt pattern while the AL-KO/Quality Kodiak Disc Brakes #KOD64VR have a brake mounting flange where the bolts are slightly offset.
It sounds like you are going to have to go with the Yakima LockNLoad Platform Roof Tray #Y05048 along with 3 sets of the Crossbar Clamps #Y05039 to fit on your Yakima OverHaul HD Adjustable Truck Bed Ladder Rack #Y01151-58 on your 2023 Ford F-250…
You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
If your 2020 Ford F-350 has the OEM prep package you'll see 4 "pucks" and a gooseneck hitch opening in the bed (pictured below). If it doesn't have pucks then you could install the Reese Under-Bed Gooseneck Trailer Hitch w/ Custom…
The Replacement Track Adapter Installation Hardware #Y69KR are the wide M8x35 t-bolts. The wide fits the Retrax XR covers. The Tonneau Cover Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Bed Ladder Racks #Y01155 which includes the pads and…
Hello Sivan, thanks for getting in touch. Adding air bags is definitely a good call if you are unhappy with your Timbrens. The air bags will allow you to fine-tune the suspension to the perfect mix of ride leveling and ride quality. Then you can also…
Hey Dan, yes the rear tie downs that come with the Torklift Tie Down set part #TL34VV do bolt to the trailer hitch at the rear of the truck. I attached a picture that shows our installer bolting it in that area.
