Custom Fit 2020 Dodge Durango Accessories

The most hidden trailer hitch available for your 2020 Dodge Durango is without a doubt the Draw-Tite Max-Frame Trailer Hitch Receiver #DT38MR. The 2" receiver for this Class III hitch will actually extend out through the bottom of the rear…

The Rhino Rack 2500 Series Roof Rack you mentioned that consists of #RRVA137B-2, #RRRLKVA, and #DK299 is indeed a fit for your 2015 Durango. The clamps are plastic coated to prevent scratching. This aero style bar is designed for less wind noise but…

Yes, all hitches have a tongue weight and towing capacity weight rating for standard towing. However, some hitches additionally have adjusted tongue weight and towing capacity weight ratings when used in conjunction with a weight distribution hitch…

Hey Steven, thanks for reaching out! You're going to want the Draw-Tite Max-Frame Trailer Hitch Receiver #DT38MR for your 2020 Dodge Durango because it sits right behind that cover you're talking about and still allows you to replace the…

We do have the parts you need, the frame brackets as well as the round bars for your Fastway e2 weight distribution hitch. I'm not sure if you just need the L-bracket or also the link plates, so I'll go ahead and list out each part for you: -…

Hey Ron. Sounds like normal wear and tear on your Fastway e2 Weight Distribution System like item #FA94-00-0800. There's no protective sleeves or anything you can do to prevent it. When those parts wear out you'll just need to replace them.…

Hey Rodney, congrats on the new trailer! So long as you keep your tongue weights below 800 lbs the 8,000 lbs Fastway e2 Weight Distribution w/ 2-Point Sway Control item #FA94-00-0800 will still work on your new travel trailer. You'll be at the…

I have a great solution for you to mount a hitch behind the bumper on your 2020 Dodge Durango; have a look at the Draw-Tite Class III Max Frame #DT38MR. This hitch mounts behind the bumper and is accessible via the removable panel on the rear bumper…

Hey David! If you're just wanting to run the lights on that 7-way all you will need is a 4-way harness and a 7-way adapter. This will be a whole lot easier then running the wiring for a 7-way, for functions you have no intention on using. To add…

Most likely that black wire is the ground since it's the only circuit not accounted for and is thicker than the other wires. It's not uncommon for trailer wiring to not be the standard colors. I attached a trailer wiring diagram for you to…

The problem you are having is a classic ground issue. If the ground wire to the trailer frame or the tail light grounds are not connected securely to clean, rust and paint free surfaces then when the headlights are turned the extra amperage draw for…

From what I could find on the 2010 Keystone Fuzion Toy Hauler 405, it has 7,000 lb. ez lube triple axles that are already flipped. Given that information, the only thing that we would have is the Correct Track Trailer Alignment and Lift Kit #LC87120…