Videos
for Honda Pilot Owners
Help Articles
for Honda Pilot Owners
Expert Answers
for Honda Pilot Owners
Hey John! Yes, the Easy Grease Trailer Idler Hub Assembly for 2K Axles #AKIHUB-440-2-G-EZ-1K looks to be exactly what you're needing! What boat trailer do you have?
view full answer...We have actually run into this issue quite a few times in the past, and there is a simple fix. The reason the Curt Echo Wireless #C51180 locks up the brakes on your camper only at low speeds is due to it being paired incorrectly, usually plugging in…
view full answer...Sure thing, David. I have linked the install instructions for the Curt T-Connector #C56291 for you below. Scroll down to the "featured help information" section and you will see the link to the instructions. I have also linked an install…
view full answer...For a version of the hub you mentioned that not is pre-greased we have the #AKIHUB-440-2-G-EZ-1K.
view full answer...We've got all of the parts you're going to need, so don't worry! To start, you'll need to install a 4 way connector, since it provides the base of what you'll need for the 7 way which is used on your Aliner travel trailer. For…
view full answer...Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…
view full answer...For your 2022 Honda Pilot, the correct wiring harness for adding the Curt Echo Wireless Brake Controller #C51180 is the T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector #118286. This 7-way does not require you to run any…
view full answer...Wiring harness #118286 is meant as a replacement for the OEM 7-Way on a 2016 Honda Pilot or to upgrade the factory 4-Way to a 7-Way. Wiring harness #118286 is similar with the difference being that it has a second connector that works with the backup…
view full answer...The best and most economical way to add a 7-way to your 2019 Honda Pilot LX is with the T-One Vehicle Wiring Harness for Factory Tow Package #118286. Although you do not have the factory tow package, you still have the ports for this installation. It…
view full answer...There is a 7-Way connector for the 2020 Honda Pilot with Tekonsha T-One Vehicle Wiring Harness for Factory Tow Package part #118286. The Tekonsha wiring will plug into a connection point behind the rear bumper. I like the Tekonsha wiring because it…
view full answer...Yes, we have the Draw Tite hitch part #75225 which is a fit for your 2017 Honda Pilot EX-L AWD and would work very well. I attached an install video for more info on how it installs as well. For trailer wiring you'd then want the part #118286…
view full answer...The correct 7-way wiring harness for your 2018 Honda Pilot is the T-One Vehicle Wiring Harness part #118286. In order to mount either connector to the exterior of the vehicle you are going to want to use both part #PK12711U and part #C57202.
view full answer...