Custom Fit 2014 Nissan Titan Accessories

The good news is that the roof rack manufacturers all decided to use the same channel dimensions so the roof rack accessories for roof channels basically all are interchangeable between (most) brands. Thule and Rhino Rack do work together just…

I only see one picture that you sent in and it shows an OBDII connector which is not what you need to connect to for a brake controller. The harness you need is the part #3050-P. The harness it plugs into will be located under the dash, to the left…

Yes, the Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 54" Long, part #Y02-480B-NT, will fit the tracks on your Leer topper. I have included a product description link below.

In order to use a Rhino-Rack Roof Rack on a Thule Roof Track you will need an adapter, the Adapter Kit for Rhino-Rack RTL600 Legs. I have attached a full list of parts below for this. Rhino-Rack Vortex Aero Crossbars part #RRVA150B-2 Rhino-Rack…

Yes, there are Rhino Rack crossbars that fit in the Thule tracks on your Leer camper, with the following part number: - Rhino-Rack Roof Rack for Thule and Yakima Tracks #Y01-120B-NT

The problem you are having is a classic ground issue. If the ground wire to the trailer frame or the tail light grounds are not connected securely to clean, rust and paint free surfaces then when the headlights are turned the extra amperage draw…

This could certainly be a grounding issue. When a circuit does not have a sufficient ground, it can cause many different issues. If possible, I recommend checking all of the grounds for your trailer taillights. You will want to make sure the ground…

This is actually a fairly common issue with certain Nissan vehicles but it should be a simple fix. It sounds like the relay for the trailer running light circuit is either missing or needs to be replaced. This relay should be located behind the…

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

Using a hitch extender is safe as long as you stay within the limits specified of 50 percent of the hitch and vehicle load capacity, and 350 lb tongue weight capacity of part #HE06. The other option to provide additional clearance from your spare…

Based on the pictures you attached and the outer bearing measurement you provided, it appears that you have 1-1/16 inch spindle like the BTR EZ Lube Spindle #TRU44FR. This particular spindle is designed for 2,000 pound axles and will use the same…

In regards to a 5.70-8 tire, the 5.70 represents the width of the tire which is 5.7" wide and the 8 represents the diameter of the wheel the tire is designed to fit which is 8" diameter. If you are needing a replacement, the Kenda K353 Bias…