Custom Fit 2013 Chrysler Town and Country Accessories

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

The replacement converter you'd need for your Parallax 7345A is the part #PD4645V. This has all of the same slots for fuses and breakers that you have now so it would work well.

I think you are going in the right direction. I would definitely replace the 14 gauge wire going to the trailer brake magnets with 10 gauge wire or larger. Usually larger than 10 gauge is hard to get into the trailer connector though. I would also…

The Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter item #22121 will definitely work on your 2013 Town and Country. This is by far the easiest way to add a 7-way connector to your Chrysler. I have linked the installation…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

It sounds like you're needing a Bargman 92/94 series taillight. The DOT number you provided usually doesn't steer us to a replacement lamp, the actual part number of your lamps should be printed or stamped on the lamp housings themselves, not…

The etrailer Trailer Hitch Receiver part #e98854 is what I recommend for a 2016 Chrysler Town and Country which will work on models with Stow-N-Go seating. The etrailer hitch offers an easy bolt-on install, hidden crosstube, and durable matte finish…

Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

In order to actuate the trailer brakes, you'd need a brake controller installed in the vehicle and a 6 or 7-way trailer connector. A 4 pole flat wiring harness like the #18002 you'd looked at carries 4 circuits- right turn/brake lamp, left…

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

The cooling coils of the Everchill RV Refrigerator with Freezer #324-000119 are at the bottom of the unit in the rear. There is a fan kit you can use with this refrigerator as well, the Valterra FridgeCool Automatic Exhaust Fan for RV Refrigerators…