Custom Fit 2012 Jeep Wrangler Unlimited Accessories

I wish it was that easy! But no you can use the tow loops in place of a base plate kit like the Blue Ox part #BX1133.

It sounds like you may have a 7-way trailer connector and a 4-way trailer connector on your truck and only a 4-way connector on your trailer. Is that correct? See the attached picture for examples of each. If this is the case, then this change will…

The Brake Buddy Select 3 part #HM39524 like you have plugs into a power outlet in the tow vehicle to power the brake setup. So what that means is that it's draining your vehicle battery as it's being used. Using a fuse bypass won't…

I was able to confirm with my contact over at Hopkins, who manufacture the Brake Buddy Classic 3 #HM39494 that you will want to use the standard setting with your 2017 Jeep Wrangler. You would only want to use the "hybrid" setting with an…

If that aftermarket bumper is a Warn Rock Crawler number 74255 then yes, there are some base plates that will fit! Or if it is a Warn/Mopar bumper, part numbers 82211715, 82211715AB or 82209740AD & skid plate part numbers 82210401 or 82210401AB…

We do have the correct fit for your 2010 Jeep Wrangler JK with the factory bumper, but the part you mentioned is not a fit for the stock bumper. I verified directly with Roadmaster that the correct base plate for your Jeep is the following: -…

I spoke to my contact at Roadmaster and we came up with a solution for you. It will require a little bit of fabrication but it should work. What you will need first is the Roadmaster MS Base Plate Bracket part #1437-3. You will need to remove the…

Sure thing, I'd love to get you all set up and in your way! For your 2015 Jeep Wrangler Unlimited with a stock bumper, you're going to need to grab a set of wiring #RM-154, tow bars #RM-676, a braking system #HM39524, and a base plate kit…

Looking at the installation instructions for base plates #RM-521448-5 you will need to remove the air damn, trim it according to the instructions, and then reinstall it. Trimming is needed for proper installation of the base plates.

Hey Erick, the correct size Bearing Buddy to use with the axle part #e75SR is part #BB2441 which has an outer diameter of 2.441 inches.

Hello there, I wanted to let you know I reached out to multiple people to check this for you. To answer your question(s): 1. No, Part #e98878 is not compatible with SUPs. 2. The dimensions of the carrier are as follows: Width Folded Open: 31"…

The Rhino-Rack RVP Roof Rack for Fixed Mounting Points - Vortex Aero Crossbars - Aluminum - Qty 2 #RRRVP45 for 2016 - 2019 Ford Explorer models are compatible with the Thule SUP Taxi XT Stand-Up Paddleboard Carrier - Roof Mount - 2 Boards #TH810001.…