Custom Fit 2008 Honda CR-V Accessories

Hey there Nickie, I would go with the etrailer Adjustable 2-Ball Mount #e66PR. Not only does it look really nice with the matte black powder coat and black nickel plating on balls and hitch pin, it also holds up really well against the elements, even…

Both the Curt #C13382 and the etrailer #e98912 hitch are a 2" Class III hitch receiver that will provide a maximum gross trailer weight of 3,500 lbs and a maximum tongue weight of 525 lbs. You are correct, they are an identical hitch but our…

We do have hitch hardware for a 2008 Honda CR-V that uses a U-bolt like you are in need of. What you'd want is the part number #RHK and on the product page enter the part number #75547 as this is a hitch that fits your vehicle and uses a U-bolt.…

It really depends on how much of the bolt hole and bolt were stripped during the install of the Curt Trailer Hitch Receiver #C11419, but to be on the safe side, you will likely want to use another M10 x 1.25 bolt. And if the weldnut was stripped at…

The Draw-Tite trailer hitch receiver, part #75547, uses 4 hex bolts that are M10 X 1.25 X 30. However, you shouldn't tap the threads uness you absolutely have to as a last resort. I highly recommend cleaning them before tapping them. I've…

I spoke with my contact at Westin and he sent me installation instructions, see link, for you to look over before ordering the Westin Safari Light Bar with Installation Kit, #30-0005-1435, for your 2011 Honda CR-V.

The Westin Safari Light Bar with Installation Kit #30-0005-1435 is a compatible fit for your 2012 Honda CR-V. I have included a photo link to the instructions for proper installation of the product to your vehicle. While the instructions say…

The bolts that come with the Curt Trailer Hitch #13555 on your 2008 Honda CR-V are M10 - 1.25 x 30 hex bolts. We actually have replacement hardware available as part #RHK on our site. Simply go to the product page and then select the manufacturer…

The u-bolt included in the hardware for hitch #13555 is a 7/16 - 14 x 1.75" x 1.00" C-C u-bolt. We do not offer this item alone but you can probably find one locally using those specs. We do offer the complete replacement hardware kit for…

The Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" #C12107 is a confirmed fit for your 2017 Toyota Camry. It sounds like the holes may have been misdrilled at the manufacturer, but it is a higher probability that there could have…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…