Custom Fit 2006 Toyota Corolla Accessories

The heater Application Guide at Kat's Heaters indicates that on the 2005 Toyota Corolla with transverse engine their engine block heater #KH11813 will install on the driver-side of the engine on the rear surface facing the driver. They term this…

For your 2006 Toyota Corolla Sport, I recommend using the Curt Trailer Hitch Receiver part #C11265. This hitch hangs down lower on the vehicle in comparison to the Draw-Tite Sportframe Trailer Hitch Receiver part #24913. As you can see in the…

First, if I can address the lawn mower, it would be a tight fit, the interior of the etrailer #e98874 is exactly 24 inches. You can measure your mower and see what you think. For the fit when folded you will need to look at the distance from the…

Is it possible your FrontLoader was built after 2016 which would mean you'd need the knob part #8880766 which has a different nut in it and would explain why the older knob #8880266 isn't threading correctly.

For the Yakima PlusNuts like part #Y8810102 I called Yakima and they told me the thread dimensions are 10-32 mm with a thread pitch of .75.

For your 2014 Toyota Corolla S with the Curt hitch part #C11265 installed the Curt bike rack part #C18085 would be a really great option that would fit well.

Trailer hitch mounted cargo carriers are not designed to have something attached to the back of them. The problem is that it would put tremendous stress on the hitch receiver and would damage it and the vehicle but I do have a possible solution for…

I checked the owner's manual for the 2013 Toyota Corolla. It states that the maximum gross trailer weight the vehicle can tow is 1,500 pounds if the trailer has brakes or 1,000 pounds if the trailer does not have brakes. But only for models with…

A 2,000 lb trailer axle like the Dexter Trailer Axle Beam part #T20BTR-7258 is not going to come equipped from the manufacturer with a brake mounting flange because of the weight of the trailer it is designed to be used on. However, most qualified…

I would check first to see if you do have brake flanges before going forward buying parts because if you do that would make it pretty easy. Otherwise you could look into having flanges welded on as that's an option too. We have them with part…

Each hitch that is available for a 2007 Toyota Corolla is a Class I hitch with a 1-1/4" receiver such as the Draw-Tite #24913. According to the '07 Corolla's owners manual, the towing capacity of the vehicle is 1,500 lbs, which is why…

The trailer hitches that fit your 2005 Toyota Corolla are all Class I hitches, and with that class of hitch, the manufacturers have a specific ball mount which is required, and it must be in a particular position. For example, I recommend the…