Custom Fit 2005 Chrysler Town and Country Accessories

The RV Cabinet Door Struts #37270545 has installation instructions included with it that I've also attached a picture of below.

Twist link chains offer excellent traction in deep snow and some are even rated for mud. They provide decent traction on ice, and since they have rounded edges ride quality isn't too bad. V-Bar chains are similar but have better grip on ice.…

Typically trailer wiring is color coded. The brake circuit is usually a blue wire which travels to each brake magnet, where it is attached to one wire from each brake magnet. The other wire from each brake magnet will ground to the trailer frame. I…

We have a couple of options to replace your Atwood 36636, and you can use either. One is from Atwood and the other from RV Safe: - Atwood RV Carbon Monoxide and Propane Gas Detector #AT36681 - RV Propane Gas and Carbon Monoxide Detector - Black…

According to my contact at Timbren, each spring unit is 5 inches tall. The spring itself is 4-3/4 inches tall, and the mounting plate is 1/4 inch thick. The Timbren spring will replace the factory bump stop.

I have done some research, and have found that the tow capacity of your 2005 Chrysler Town & Country is 3700 lbs. You will want to check in your owners manual to confirm the towing capacity. Also, it is important to remember that your towing…

The main difference between a time delayed brake controller like the Tekonsha PowerTrac #39523 and a proportional brake controller like the Tekonsha P2 #90885 is that a time delayed brake controller has no internal parts that sense the braking of the…

I have two options for you; a system without sway control in the Curt MV Weight Distribution System part #C17050 and a system with sway control in the Husky Center Line Weight Distribution System part #HT32216. These systems are both rated correctly…

When you search by vehicle, the page you'll be taken to has a drop down menu at the top where you can choose Town and Country models 'with Stow-N-Go seats' or 'without Stow-N-Go seats'. The Draw-Tite Class III receiver hitch, part…

In order to convert the 4-way on a 2019 Ford F-150 to a 7-way with 4-way I recommend using the 4 to 7-Way with 4-Way Trailer Connector Adapter part #ETBC7. This is a kit that comes with the trailer connector and everything else you need to get the a…

We have a hitch for that vehicle. For the 2005 Chrysler Town and Country with the stow and go seats, I would recommend the Draw-Tite Class III Hitch, part #75305. We have a video showing the installation of this hitch, I will provide a link to the…

Timbren does not exclude versions of the 2012 Chrysler Town and Country that have the auto leveling system like you mentioned so the part #TDVRRT would fit and work well.