Custom Fit 2005 Chevrolet TrailBlazer Accessories

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

I'd be happy to assist. For a 2001-2014 E350 van model or 2015-2018 E350 Cutaway, I recommend the SumoSprings Solo Custom Helper Springs - Rear Axle #SSR-130-54 which have a 2,800 lb capacity at 50% compression. These springs progressively add…

The replacement fairing for the Thulue Canyon XT #TH859XT is part #TH83FR.

The Champion 4,500 watt inverter generator is started electrically, with a push-button start: - Push-Button Start: Champion 4,500-Watt Dual Fuel Portable Inverter Generator - Gas or Propane #CH44FR

No problem, I can help you find the correct front hitch for your 2005 Chevy Trailblazer. The part number you are looking for is the Curt #31055. There is not a Class rating on front hitches typically but this hitch has a 350lbs Vert Pull and a…

The Thule Canyon XT Roof Cargo Basket - Steel - 49" x 40" x 6" - 150 lbs #TH859XT comes with everything necessary for installation onto a roof rack; the wind fairing and associated hardware is also included in purchase. This cargo…

To keep a maintenance charge on the battery I recommend using a harness such as #BX88206 with the tow bar wiring you will be using so that you can run a wire from the connector at the front of the toad to its battery. There are a couple of ways to do…

There is one option that has the right dimensions to replace the Atwood 87891, which is a handle from Stromberg Carlson: - Replacement Crank Handle for Stromberg Carlson Landing Gear #LG-119226 The metal shaft where it attaches to the jack has an…

The Stromberg Carlson Crank Handle, part #LG-119226, is designed to work with Stromberg Carlson LG-1 or LG-183708, and most other brands of landing gear including Atwood and Lippert. If the jack you have on your trailer is one of these, this crank…

The Atwood manual crank you referenced we no longer carry. The Replacement Crank Handle for Stromberg Carlson Landing Gear #LG-119226 is the manual crank we have that will work for your Atwood Electric Jack. This is a much longer option which would…

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

Atwood is no longer in business so those camper jacks are no longer something available for purchase. While I realize that's not what you wanted to hear, there are options for replacements that I wanted to mention so you have that option: -…