Custom Fit 2003 Honda CR-V Accessories

We have just what you need. If you type RHK in the search box on our website it will take you to the replacement hardware kit product page. You will then simply type the number of the hitch you need hardware for in the box that is labeled Hitch Item…

I checked the online version of the owner's manual for a 2019 Chevy Malibu, and you are correct that it was updated. The owner's manual states that the vehicle cannot be towed with all four wheels on the ground. However, it does state that a…

Your 2002 Honda CR-V has fixed mounting points on the roof so all of the roof racks we offer are designed to be installed using those attachment locations. We do not offer any roof racks that attach to the door jambs of your CR-V. I recommend the…

To make your baseplates work with your Roadmaster 5250 Falcon tow bar, you need to determine what base plates you have you have on your 2003 Honda CR-V. We have the Roadmaster XL style #1541-1, the Roadmaster MX #1541-5, or the Blue Ox #BX2232. The…

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

The best trailer hitch receiver for your 2006 Honda CR-V is the etrailer Trailer Hitch Receiver #e69AR so that's what I recommend going with. All of the trailer hitches for your CR-V are pretty much the same, but what sets this hitch apart from…

There are 3 hitches made for the 2003 Honda CRV. They each are designed differently and they each have different hardware kits. There are three Class III hitches, the Draw-Tite #75690, the Curt #13535, and the etrailer Hitch #e69AR. You can order the…

For your 2002 Honda CR-V, there are three parts you will need to install crossbars on the roof. First, you will need the Thule Rapid Podium foot pack, #TH460R, to provide a base for the crossbars. Next you will need 53 inch SquareBars, #TH712200.…

Hi Kay, Depending on the model of your Roadmaster baseplate you'll need a different adapter for a Reese tow bar. The #1541-1 you were looking at is an XL model and would need adapter #RM-025. This adapter fits EZ, EZ2, EZ4, and XL (Crossbar…

For your 2003 Honda CR-V you will want the Coil SumoSprings Custom Helper Springs #CSS-1125R. These are confirmed to fit your vehicle while the Springs #CSS-1094 you found are for a smaller gap spring and will not provide you with the stability and…

I did some checking and it looks like your 2003 Honda CR-V AWD is flat towable as-is as long as you keep it under 65 mph. For a base plate kit you'll want the part #1541-1 for if you do not have the brush guard or part #1541-3 for if you do have…

Yes, the Yakima EXO Swing Away Storage System w/ 2 Enclosed Cargo Carriers item #Y74ZR is compatible with the 2" receiver on your 2018 BMW X1. As far as exhaust heat goes, the shank on the swing away has a 2" rise to lift the carrier up and…