Custom Fit 2003 GMC Sonoma Accessories

Since your 2003 GMC Sonoma has the roll pan, the correct hitch for your truck is the Draw-Tite Trailer Hitch item #75085. This hitch is custom fit and bolts to your Sonoma with included hardware. If you are planning on towing you will also need a…

Your 2003 GMC Sonoma and a 2002 Chevrolet S-10 do indeed use the same trailer hitch receivers due to them having the same trailer hitch mounting locations, but you will need to make sure the hitch matches the options of your truck. What I mean is…

The Draw-Tite Hitch #75085 that you referenced would be exactly what you would need. This hitch is designed to work on 1998 Chevy S-10s with stepside and a roll pan bumper so it should work well for you. The install will require the temporary removal…

I spoke with my contact at Draw-Tite, who tells me that the Class III #75085 receiver will fit the 1999 S-10 Sportside with the non-towing bumper. He did not have any information regarding fit on the Extreme model, which means that some trimming of…

For your brake assemblies with the 4-bolt mounting flange, you will want the Dexter Electric Brake Kit for 4 Bolt or 5 Bolt Flange- 6K #23-105-106-09. You will need one set for each of your 3 axles. If you need the mounting hardware the Brake…

A 6,000 lb axle is usually going to be 3" in diameter. Therefore, for the u-bolts you can use part #APUBR-8 for 7" long or part #APUBR-9 for 7-1/4" long. You can measure your existing u-bolts or from the bottom of the axle to the top…

We offer 2 wet bolts that may work for you because they have screw-in Zerk fittings. The first wet bolt I recommend is part #34007-187-00. This is a step wet bolt designed to work with 1-3/4 inch double eye leaf springs. The overall length of this…

The Replacement Non-Locking Paddle Handle for UWS Toolboxes #UWSNONLOCKING only comes with the handle. You will need to source rivets locally to install this on your toolbox.

I checked with UWS and the closest non-locking version of the Replacement Lock Handle #UWS003-SLLKBLK available is the Replacement Non-Locking Paddle Handle #UWSNONLOCKING. This polished stainless steel lock works with many UWS toolboxes and its bolt…

The Replacement Non-Locking Paddle Handle for UWS Toolboxes part #UWSNONLOCKING is polished stainless steel.

I have the perfect solution that will allow you to control and adjust the air pressure of your airbags from inside the vehicle. To do this, I recommend using the Air Command I Xtreme part #F2543 as this has everything you will need to control the air…

Sounds like you have the Sportside with a non towing bumper which would mean you would want the part #75085. If instead you had the factory roll pan bumper you would want the pat #13920. I attached a picture of what the sportside with non-towing…