bing tracking image

JR Products Snapper Coupler Pin Review

content loading

Customers compare 37201211 to these similar products

Products Featured in this Video

Review of the JR Products Snapper Coupler Pin

Howdy neighbor, Adam here with etrailer. Today, we're gonna be taking a look at a coupler pin. So we have a lot of these on our website, but some are gonna be better for other couplers than the others. So with this one, it's gonna be 3 1/2 inches long, and it's gonna have a diameter of about 1/4 inch. So make sure that your hole is gonna be nice and sized right so we can fit this on here. This is gonna be great for the easy lock couplers, as you see here, it's plenty long, and it is gonna be made of steel with a zinc coating, so it's not gonna rust away over time.

So it'll look good just like our powder-coated coupler here. And it is a little spring latch, you just lift this up and clip it in. You can use it on couplers like this, it might be a little overkill since it's so long. We really don't need a long one for this. We do have a shorter one we just did a video on, and that's on our website as well.

So it will work for this, but it's a little big. And that'll do it for our look at the zinc-plated 3 1/2 inch coupler pin..

Questions and Comments about this Video

Info for this part was:

Employee Kathleen M
Installed by:
Kathleen M
Employee Adam E
Installed by:
Adam E
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video by:
Chris R

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.