Customers compare 20400 to these similar products
Products Featured in this Video
Today we'll be reviewing part #20400. This is the Hopkins engager trail breakaway kit with charger and tester with a top mount display. You can see here on top how we have a push to test button. That's going to illuminate one of three LEDs which will indicate whether our battery is charged, whether it needs to be recharged, or whether it's currently charging. Also on top we have a chart here… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The Autowbrake #3430001 installs on the trailer side so you would generally just utilize the 7 way plug already on the trailer. We do recommend using a junction box to connect the Autowbrake wiring harness. We actually make an installation kit…
view full answer...There really isn't a particular maximum trailer weight that is used to determine when brakes need to be added to both axles of a tandem axle setup. While I do still recommend checking your local laws, I am also not aware of any general laws that…
view full answer...Hey Erick, the correct size Bearing Buddy to use with the axle part #e75SR is part #BB2441 which has an outer diameter of 2.441 inches.
view full answer...Traditionally, trailer manufacturers did not use electric brakes on boat trailers because the brake magnet wiring and trailer wiring did not always have the best insulation or water protection. These days, more and more manufacturers are using…
view full answer...First you will need to remove the old hydraulic equipment. Remove the surge coupler or actuator, remove all the lines, and finally remove the brake assemblies. If you have 10 inch diameter hub and drums, you may need to replace those as well. If you…
view full answer...The airbags that I recommend for your 2018 Ford F-250 are the Air Lift LoadLifter 5000 Air Helper Springs part #AL57399. These airbags will not interfere with the B&W Turnoverball Underbed Gooseneck Trailer Hitch part #BWGNRK1116 as you can see…
view full answer...The brakes shouldn't necessarily lock up, but the brakes should quickly bring the trailer to a safe stop. The weight of the trailer shouldn't matter if the breakaway kit and the trailer brakes are working properly. All trailer from utility to…
view full answer...I looked up the G-HDSJ-24 jack you're mentioning and it comes back to a scissor jack with a 7.5K capacity. Since we do not carry the Domar brand we are not going to have a direct replacement, however the Lippert Scissor Stabilizer Jacks w/ Handle…
view full answer...The Autowbrake Electric Brake Controller #3430001 does not have a built in breakaway system. You'd have to have a separate system installed on the trailer for that like the Hopkins kit part #20099.
view full answer...I reached out to Autowbrake and found that when using the Autowbrake Electric Brake Controller #3430001 key fob the trailer lights will not activate. This includes the manual override. The key fob will cause the brakes to pulse, similar to an…
view full answer...I reached out to my contact at AutoWBrake and he was able to confirm that the Autowbrake Electric Brake Controller #3430001 can be installed onto the rear of a vehicle like you mentioned. He mentioned that it was tested in that manner during…
view full answer...The Autowbrake Electric Brake Controller part #3430001 is an excellent option for a 2016 Porsche Cayenne. In regards to parts needed, there would be no additional components for the Cayenne assuming it did in fact come with a factory tow package. If…
view full answer...