Replacement Locking Bar Assembly for Demco Autoslide 5th Wheel Hitches: The Breakdown Video

Hey Rod, thanks for reaching out. Yes, it will! The Curt Helux Shock-Absorbing 5th Wheel Pin Box #C83RJ will indeed work with the Demco Autoslide 5th Wheel Hitch #DM8550038. Just make sure you also use the Demco Autoslide Locking Plate for Lippert…

Hey Bubba, thanks for reaching out. That really sucks that you had to unhook at an angle because the head is going to be stuck in that position. This is one of the biggest downfalls of the Demco Autoslide hitches and I am sorry to say there is no…

Hey Scott, I just got the Demco wear plate 14711 added to our selection under part #DM48KV.

If the handle of your Demco Hijacker won't stay out when you are trying to disconnect from the trailer Demco recommends installing the safety pin in the second handle hole just outside of the frame handle bushing to hold it out so that you can…

Thank you for purchasing the Demco Hijacker Autoslide 5th Wheel Trailer Hitch #DM8550034 back in 2017. All replacement parts we sell appear on the page I linked for you. I also linked the install instructions for this hitch and on pages 9 through 11…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

Hey Jairo. So we do not offer a direct replacement for the Norcold N611, but we do have a good replacement option for you. It really comes down to what will fit in your cutout space. Take a look at the Norcold RV Refrigerator w/ Freezer - 8.2 cu ft -…