Feature Breakdown: Curt Class III Ball Mount with 1-7/8" Ball Video
Info for this part was:
Video Edited:
Jacob T
Video by:
Dustin K
Installed by:
David F
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
The Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs #C45036 does come with the hitch ball installed. The ball platform is 3/4 inches thick which is standard with a 1 inch diameter hole. This is the shortest option for that rise…
Yes, the Curt Class III Ball Mount with 2" Ball #C45036 has a hitch ball shank diameter of 1". The 1-7/8" Hitch Ball #C40002 that you asked about has a shank diameter of 1" as well so it will fit just fine. You will just want to…
The 1-7/8" Hitch Ball #C40002 will require a 1-1/2" Socket #ALL643210. You will need a wrench that will open to 1-5/8" to hold the ball in place while torqueing the nut.
The Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs - Chrome Plated #C45293 comes with the pre-torqued 1-7/8 inch ball, but you can absolutely remove it and install a 2 inch ball like #63845.
You will just need the 1-7/8" Hitch Ball item #C40002. You won't have to buy a new ball mount. This hitch ball is 1" in diameter with a 2-1/8" long shank and has a 3,500 lbs capacity.
To replace the hitch ball you would simply loosen and remove the hitch ball nut and pull the ball out of the ball mount hole. You may need a large wrench to loosen the nut. The Tow Ready 1-7/8 Inch Hitch Ball, part #19260, would be a great fit for…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…
Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…