Trunk Bike Racks Specs:
Features:
...Trunk-mounted rack carries 2 bikes on the back of your sedan, hatchback, or van Not compatible with most spoilers Anti-sway cradles with ratcheting straps hold bike frames at 3 points...
Installation Notes:
Do not open trunk while rack is installed
More Information >Trunk Bike Racks Specs:
Features:
This 2-bike trunk rack has an arched dog leg that fits over the spoiler on most sedans, hatchbacks, and SUVs. You can fold the adjustable arms down for parking in tight spaces, and you can quickly remove the rack and store it in your trunk or garage.
More Information >Trunk Bike Racks Specs:
Features:
...Trunk-mounted rack carries 3 bikes on the back of your sedan, hatchback, or SUV Expanded, arched base with dog leg fits over most large spoilers Anti-sway cradles with ratcheting straps...
Installation Notes:
Do not open trunk while rack is installed
Do not use rear wiper when rack is installed
Upper strap should be placed over the leg
More Information >Trunk Bike Racks Specs:
Features:
Offer your bike safe passage at an affordable rate with this trunk-mounted carrier. Passage mounts securely to your vehicle with the patented FitDial adjustment system and straps, and anti-sway cradles keep your bikes from jostling during transport.
Installation Notes:
Place top clips in the gap at the front edge of the top of the trunk, hatch or door
Set lower clip/hooks into frame holes in chassis behind bumper.
Caution: Rear wiper can not be used when carrier is mounted
Always check to make sure there is no contact between the lower straps and the muffler and/or exhaust pipe.
Lower arm of carrier should be positioned on upper tier of bumper.
More Information >Trunk Bike Racks Specs:
Features:
...Hanging bike rack lets you carry 3 bikes on your vehicle's trunk Fits over most types of spoilers 2 Arms with padded, anti-sway cradles and rubber straps secure bikes by the frame 4...
More Information >Trunk Bike Racks Specs:
Features:
This trunk bike rack safely transports 2 bikes to your favorite spot. Securely mounts to the rear of your vehicle using the Fit Dial adjustment system and multiple straps. Anti-sway cradles hold bikes by the frame and reduce movement while driving.
Installation Notes:
Place top clips in the gap at the front edge of the top of the trunk, hatch or door
Set lower clip/hooks into frame holes in chassis behind bumper.
Caution: Rear wiper can not be used when carrier is mounted
Always check to make sure there is no contact between the lower straps and the muffler and/or exhaust pipe.
Lower arm of carrier should be positioned on upper tier of bumper.
More Information >Trunk Bike Racks Specs:
Features:
This 2-bike trunk rack adjusts to fit the shape of your sedan, hatchback, or van. It has adjustable arms that fold down for parking in tight spaces, and you can quickly remove it and store it in your trunk or garage.
Installation Notes:
Place top clips in the gap at the front edge of the top of the trunk, hatch or door
Set lower clip/hooks into frame holes in chassis behind bumper.
Caution: Rear wiper can not be used when carrier is mounted
Always check to make sure there is no contact between the lower straps and the muffler and/or exhaust pipe.
Lower arm of carrier should be positioned on upper tier of bumper.
More Information >Trunk Bike Racks Specs:
Features:
...Trunk-mounted rack carries 3 bikes on the back of your sedan, hatchback, or van Not compatible with most spoilers Anti-sway cradles with ratcheting straps hold bike frames at 3 points...
Installation Notes:
Do not open trunk while rack is installed
More Information >Trunk Bike Racks Specs:
Features:
Carry 1 bike on your vehicle's rear window without having to mess with a cumbersome trunk rack. Carrier installs in seconds with vacuum cups that won't scratch or dent your vehicle. Stores in your trunk or luggage when not in use.
More Information >Trunk Bike Racks Specs:
Features:
This 3-bike trunk rack adjusts to fit the shape of your sedan, hatchback, or van. It has adjustable arms that fold down for parking in tight spaces, and you can quickly remove it and store it in your trunk or garage.
Installation Notes:
Place top clips in the gap at the front edge of the top of the trunk, hatch or door
Set lower clip/hooks into frame holes in chassis behind bumper.
Caution: Rear wiper can not be used when carrier is mounted
Always check to make sure there is no contact between the lower straps and the muffler and/or exhaust pipe.
Lower arm of carrier should be positioned on upper tier of bumper.
More Information >Videos
for Trunk Bike Racks
Help Articles
for Trunk Bike Racks
Expert Answers
for Trunk Bike Racks
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...That is an excellent question and is asked more often than you think. Electric brakes like what come in the Electric Trailer Brake Kit #AKEBRK-2 can be submerged in water when you are loading/unloading your boat. Since water and electricity…
view full answer...The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…
view full answer...I&…
view full answer...You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…
view full answer...Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what…
view full answer...It really just depends on what the wires are for. Most likely you have several ground wires among the 8 as well as a couple running light circuits in there as well. You just have to run all of the wires to the correct circuits. The 4-way wiring of…
view full answer...A 4-way trailer connector will have four functions which means it will also have four wires for the exception of wishbone harnesses. These four functions are ground, tail light, right turn, and left turn. The ground function will usually be…
view full answer...The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…
view full answer...I checked your order notes and the leaf springs you bought last year were the part #e28SR which are for 5k axles. Since this is over the capacity of your axle failure would not have been caused by over loading the trailer assuming you stayed under…
view full answer...The Dexter 072-078-00 is a 2,200 lb capacity leaf spring. You can use a higher capacity leaf spring, however it…
view full answer...