2007 Chevrolet Uplander Trunk Bike Rack

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

After doing some digging, I was able to find one option for a 3-bike trunk-mounted bike rack for your 2016 Lexus RC 300, from Yakima: - Yakima FullBack 3-Bike Rack #Y02633 The FullBack will fit your Lexus, but it is also just a really nice rack with…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The main difference between the Thule Passage #TH911XT and the Gateway #TH78VR is how each functions. The Passage arms (that hold the bikes) can only move with the upper leg. This limits the vehicles that it fits and its ability to hold bikes level .…

Not that I have heard of but that's typically not an achievable goal of the manufacturer's. The Curt Hitch item #C29VV is a better option for the 2025 Lexus RX 350h. It doesn't have that piece of angle iron mounted between the crossbar…

Yes, the Yakima HangOut 2 Bike Rack #Y02637 is compatible with all models of the 2018 Ford Edge to include your SEL model. The straps wrap over the spoiler and anchor to the rear door on the top and the bottom.

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

Hello Jeff, thanks for reaching out. The trailer hitch on your 2021 Hyundai Kona is a 2" receiver, correct? If so, the Benton Bike Rack #B54VR is a great option for carrying a single bike. It has a weight capacity of 80 lbs, so a 50 lb E-Bike…

The trailer hitch that is the best option for a bike rack for your 2012 Toyota Sienna is going to be the etrailer hitch as it offers the best combination of bumper and ground clearance as well as easiest install; the best hitch is going to be the…

Hey Danny, yes the ramp part #KU63VR does fit the Kuat Piston Pro SR part #KU88ZR single bike rack.

Yes, there are Hal. I have copied them into the bottom of this answer. The B&W Trailer Hitch item #BW97BR has been confirmed to fit the 2022 Honda CR-V. This is a class III hitch with a 2" receiver. What do you plan on using your hitch for?…

Yes, that is correct Reed. You will have to lower the exhaust to install the B&W Hitch item #BW97BR on your 2021 Honda CR-V. I have linked a screenshot below from the instructions that shows this step. The B&W Hitch item #BW97BR is custom fit…