Trunk Bike Racks Specs:
Features:
...The Passage includes cushioned anti-sway cradles with Thule's No-Sway Cage accessories to prevent bike-to-bike contact during transport. The anti-sway cradles also keep your bikes from making conta...
Installation Notes:
Place top clips in the gap at the front edge of the top of the trunk, hatch or door
Place lower clips in the bottom edge of trunk or hatch.
Caution: Rear wiper can not be used when carrier is mounted
More Information >Trunk Bike Racks Specs:
Features:
...and a FitDial system with vehicle-specific settings. It includes a Thule One-Key System cable lock that secure your bikes to the rack, and you can fold it flat for storage in your trunk or garage. HideAway...
Installation Notes:
Place top clips in the gap at the front edge of the top of the trunk, hatch or door
Place lower clips in the bottom edge of trunk or hatch.
Caution: Rear wiper can not be used when carrier is mounted
More Information >Trunk Bike Racks Specs:
Features:
Take this 2-bike rack out of the box, strap it to your vehicle, load your bikes, and you're off to the trailhead - it's that easy. When you're done riding, remove it and fold it up for storage. Fits most hatchbacks, sedans, and vans.
Installation Notes:
Use the large side of the s-hook vs. the small side (see instruction manual)
Attach bottom hooks to internal metal bumper or frame under vehicle
Do not open trunk while rack is installed
More Information >Trunk Bike Racks Specs:
Features:
...anti-sway cradles Prevent bike-to-bike and bike-to-vehicle contact with No-Sway Cage accessories Include rubber straps to secure bikes in place Dual support arms Provide stability for bikes Fold down when...
Installation Notes:
Place top clips in the gap at the front edge of the top of the trunk, hatch or door
Place lower clips in the bottom edge of trunk or hatch.
Caution: Rear wiper can not be used when carrier is mounted
More Information >Trunk Bike Racks Specs:
Features:
2-Bike trunk rack is perfect for riders who occasionally take a friend with them out to the trail. Quick-release hubs let you adjust the rack to fit the contour of your trunk and soft pads on the base of the rack protect your vehicle's finish.
More Information >Trunk Bike Racks Specs:
Features:
Just take this 3-bike rack out of the box, strap it to your vehicle, load your bikes, and you're off to the trailhead. When you're done riding, remove it and fold it up for storage - quick and easy. Fits most hatchbacks, sedans, and vans.
Installation Notes:
Use the large side of the s-hook vs. the small side (see instruction manual)
Attach bottom hooks to internal metal bumper or frame under vehicle
Do not open trunk while rack is installed
More Information >Trunk Bike Racks Specs:
Features:
...The included Lube Tube lets you keep the plungers in working condition. Easy Installation, Setup, and Removal To install the rack, make sure the mounting surface is clean, moisten the surface of each cup, place...
More Information >Trunk Bike Racks Specs:
Features:
...Universal fork mount and rear-wheel holder secure your bike to the carrier 9-mm Quick-release skewer and plug and 12-mm x 100-mm thru-axle plug included Vacuum cups install to metal, glass, or fiberglass...
More Information >Trunk Bike Racks Specs:
Features:
...from scratches and abrasions 80" Long stabilizing strap included to stead bike frames during transport Durable steel construction with black powder coat is rust resistant Specs: Carrying capacit...
More Information >Trunk Bike Racks Specs:
Features:
...Universal fork mount and rear-wheel holder secure your bike to the carrier 9-mm Quick-release skewer and plug and 12-mm x 100-mm thru-axle plug included Vacuum cups install to metal, glass, or fiberglass...
More Information >Trunk Bike Racks Specs:
Features:
...Universal fork mount and rear-wheel holder secure your bike to the carrier 9-mm Quick-release skewer and plug and 12-mm x 100-mm thru-axle plug included Vacuum cups install to metal, glass, or fiberglass...
More Information >Trunk Bike Racks Specs:
Features:
...Universal fork mount and rear-wheel holder secure your bike to the carrier 9-mm Quick-release skewer and plug and 12-mm x 100-mm thru-axle plug included Vacuum cups install to metal, glass, or fiberglass...
More Information >Videos
for Trunk Bike Racks
Help Articles
for Trunk Bike Racks
Expert Answers
for Trunk Bike Racks
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...That is an excellent question and is asked more often than you think. Electric brakes like what come in the Electric Trailer Brake Kit #AKEBRK-2 can be submerged in water when you are loading/unloading your boat. Since water and electricity…
view full answer...I'm assuming your Express doesn't have the 7-way, but does have the capped round plug behind the bumper on the drivers side frame rail, you'll install part #30955. Simply remove the cap and plug the connector in. To wire up…
view full answer...You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…
view full answer...Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side.…
view full answer...Since the discontinued MaxxAir 4700k model fits a standard 14 x 14 RV vent opening, I recommend the MaxxFan Plus Roof Vent w/ 12V Fan - 10 Speed #MA00-04500K. The MaxxFan Plus comes with a thermostat and a remote for easy temperature customization.…
view full answer...A 4-way trailer connector will have four functions which means it will also have four wires for the exception of wishbone harnesses. These four functions are ground, tail light, right turn, and left turn. The ground function will usually be…
view full answer...It really just depends on what the wires are for. Most likely you have several ground wires among the 8 as well as a couple running light circuits in there as well. You just have to run all of the wires to the correct circuits. The 4-way wiring of…
view full answer...I checked your order notes and the leaf springs you bought last year were the part #e28SR which are for 5k axles. Since this is over the capacity of your axle failure would not have been caused by over loading the trailer assuming you stayed under…
view full answer...The Dexter 072-078-00 is a 2,200 lb capacity leaf spring. You can use a higher capacity leaf spring, however it won't increase the capacity of your trailer as the axle is still rated for that max capacity of 4,400 lbs. My recommendation for…
view full answer...The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is…
view full answer...Filter Products (24)