Base Plates Specs:
Base Plate Features:
Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.
Installation Notes:
Requires temporary removal of bumper, fascia, and/or grille during installation
Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.
Drilling required for installation
Tow hooks, if present, will be removed and remain off the vehicle after installation.
More Information >Base Plates Specs:
Base Plate Features:
Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.
Installation Notes:
Requires temporary removal of bumper, fascia, and/or grille during installation
Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.
Drilling required for installation
Tow hooks, if present, will be removed and remain off the vehicle after installation.
More Information >Base Plates Specs:
Base Plate Features:
Installation Notes:
Installation requires some minor drilling
Requires temporary removal of bumper/fascia during installation
Fascia trimming required for installation
More Information >Base Plates Specs:
Base Plate Features:
Base Plates Specs:
Base Plate Features:
Base Plates Specs:
Base Plate Features:
Installation Notes:
Requires temporary removal of bumper/fascia during installation
Requires some trimming of bumper (fascia, plastic, and/or grille)
Installation requires some minor drilling
More Information >Videos
for Base Plates
Help Articles
for Base Plates
Expert Answers
for Base Plates
I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any…
view full answer...If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…
view full answer...The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…
view full answer...The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…
view full answer...Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left…
view full answer...The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…
view full answer...The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03.…
view full answer...The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…
view full answer...I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…
view full answer...From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x…
view full answer...Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of…
view full answer...For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…
view full answer...