2010 Dodge Camper Tie-Downs

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

Hello Mike, Sounds like you are getting things set up the right way and not going over your payload, I respect that. It looks like the weights are the same whether you have a 6 3/4' or 8' bed. If you happen to have an aftermarket hitch,…

Hello Bart, thanks for reaching out. I can definitely point you in the right direction, but I will need a bit more information on your truck before I can recommend the correct tie downs. Can you please answer the following questions for me? 1. What…

Hey Dan, yes the rear tie downs that come with the Torklift Tie Down set part #TL34VV do bolt to the trailer hitch at the rear of the truck. I attached a picture that shows our installer bolting it in that area.

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

Do you have a crew cab or a regular cab? Torklift is really particular with their fits but with that last bit of info I should be able to see what solution would work.

Unfortunately we do not have a video of the HappiJac Truck-Mounted Camper Tie-Downs #LC184089 being installed. The Rear anchors are installed in the end of the bumper. There is no precise mounting location since a variety of bumpers may be installed.…

Hey Randy! The TorkLift Tie Downs item #TL63PR, you were looking at, do include a set for both the front and the rear. These fit the 2024 Ford F-350's with both the 6-3/4' and 8' bed trucks with a factory hitch, Torklift SuperHitch Magnum…

Hey Rob, the Torklift camper tie downs part #TL87DR that you referenced are the correct tie downs for your 2024 Ford F-250 long bed with a factory hitch and will work with any of the steps we sell. The only ones it doesn't work with is the…

There is no weight capacity for the Brophy Clamp On Camper Tie-Downs #HSSF. The tie-down hardware kit #TDHP, that is used to secure the camper to the #HSSF tie-downs has a weight capacity of 3,000-lbs. My contact at Brophy said the tie-downs will…

Hi KJM; assuming you have the factory trailer hitch the correct TorkLift camper tie-downs for your 2024 Sierra 3500 dually is the Custom Fit Tie Down Kit With TL44FR | TL84FR #TL94PR. This will fit with that built-in step you're referring to as…

Hi Adam, The Brophy Stake Pocket Mounted Camper Tie-Downs #TDSF don't technically have a weight capacity, though the turnbuckles they need, the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs #TDHP, have a 3,000 lb weight capacity. So…