Transmission Cooler

change make

Select Vehicle Model

  
Transmission Cooler

Available Models for 2010 Dodge Transmission Cooler


Transmission Coolers

Preserve the life of your transmission and improve towing performance with a transmission cooler. Protect your vehicle's warranty or simply give your vehicle a boost with a simple to use addition to any towing set up. Push on fittings and three mounting positions ensure a hassle-free installation, while varying performance levels allow you to match the transmission cooler to your specific towing needs.

Find the correct fit for your vehicle by entering the year, make and model to the left. We offer fits for most popular vehicles, including Ford, Chevy, Dodge, GMC, Honda, and Toyota.





Vehicle Transmission Coolers

Enter the year, make and model of your vehicle above to find custom fit transmission coolers. You can also browse the different types of coolers, parts and accessories available below.


Vehicle Coolers and Parts



Accessories



2010 Dodge Questions and Answers


  • Can a Trailer with 14 Inch Tires and Wheels Be Upgraded to 15 Inch Trailer Tires and Wheels
  • As long as the bolt pattern is the same and you have enough room all around the existing tires for the larger size then yes, you can go to a 15 inch wheel and tire. There are a couple other things you will want to look at though. If the wheels attach to your hubs using wheel bolts and not lug nuts then the center pilot hole of the new wheels as to be exactly the same as the old wheels. Otherwise the wheel will not center on the hub. If the wheel does use lug nuts then the pilot hole...
    view full answer...

  • What is the Height and Width of a 205/75-15 Tire on a 15 Inch Trailer Wheel
  • The 205/75-15 Tire and Wheel Combo, # AS15B475WS, is 8.077 inches wide and 27.1155 inches tall. An F78-14 tire and wheel will be about the same width but it will be 1 inch shorter. I have included a link to a tire size FAQ article that should help.
    view full answer...

  • What is the Towing Capacity of a 2010 Dodge Journey SXT with Trailer Hitch # 87487 Installed
  • If Dodge has rated your 2010 Journey for 3,500 pounds gross trailer weight, that is the maximum the vehicle can tow, even if a trailer hitch is rated higher. The limiting factor is the component with the lowest capacity, which is the rating you need to go by. Adding weight distribution will not increase the towing capacity of the vehicle. The towing capacity of the vehicle remains static at 3,500 pounds. To complete your towing setup you may need the following: Ball Mount Kit, part...
    view full answer...

  • Can a 5th Wheel Trailer be Towed with a 2010 Dodge Ram 1500 with 5 Foot 7 Inch Bed
  • Towing a fifth-wheel trailer with a 2010 Dodge Ram Pickup with 5 foot 7 inch bed is definitely possible. Beds shorter than 6 feet require the addition of a Sidewinder replacement pin box for the fifth-wheel trailer you will be towing. To select the correct Sidewinder pin box, see link, you will need to determine the manufacturer and model number of the pin box on your trailer. Once you have selected a trailer and Sidewinder, you will need to install a stationary 5th wheel hitch in the...
    view full answer...

  • How to Mount Stabilizer Jack, # TJ01RT, On a Trailer Frame: Welding or Bolt-On
  • You can mount the Stabilizer Jack, # TJ01RT, two ways. The best way is to have the jacks welded to the trailer frame by a qualified professional. The alternative is to mount the jacks using your own hardware. You will need to drill two holes into the bottom of the trailer frame for the mounting holes on the top of the jack. Grade 8 bolts are the strongest and you can get them at your local hardware store. The bolts can be inserted through the top of the frame down through the jack, or up...
    view full answer...

  • Will Kodiak Disc Brake Kit, # K2HR712 Fit a 7,000 Pound Dexter Trailer Axle
  • Yes, the Kodiak Disc Brake Kit, # K2HR712, will fit 7,000 pound Dexter trailer axles. It is also designed to fit 16 inch and larger wheels with an 8 on 6-1/2 inch bolt pattern. You can check your existing bearing numbers to determine if this kit or another will fit your axle. If you have # 25580 inner bearings and # 14125A inner bearings, 16 inch or larger wheels with an 8 on 6-1/2 bolt pattern, this kit will work. The bearings and seals for this kit are sold separately, but the races...
    view full answer...

  • Do You have a Generic Wiring Diagram for Installing a Brake Controller on a 2010 Dodge Ram
  • Yes, we do have a generic brake controller wiring diagram on our Brake Controller Information page. I have added a link to it below. The bundle of wires you are looking for should contain the following: white with red stripe, blue with white stripe, green with black stripe and blue. You will match those 4 wires to the wires on the brake controller via the chart at the bottom of the page or the picture to the right that illustrates how the wires connect by color.
    view full answer...

  • Can the TorkLift SuperTruss Extension be Used on a 2010 Dodge Ram 2500 with Factory Trailer Hitch
  • The SuperTruss extension # TLE1548 is designed to work with TorkLift SuperHitch trailer hitches only. You can add one to your 2010 Dodge Ram 2500 using # TLD1102. Then you would be able to use the extension. With this set up the extension will have a tongue weight capacity of 600 pounds. How much extension do you need? If you do not need 48 inches then there could be some other options that would not require the addition of a SuperHitch.
    view full answer...

  • Recommended Replacement Landing Gear For Keystone Cougar 285 5th Wheel Trailer
  • The Venture brand was made by Lippert Components, so it is very likely that a Lippert landing gear jack will work for you. Based on the weight of your trailer, you will want the # LG-1 landing gear set, but we will want to measure to be sure this is the right size for you. The two things you will want to measure will be the distance of the black outer tube of the jack and the distance between the frame clamps (this measurement can differ depending on where the weld stops are located)....
    view full answer...

  • Troubleshooting No Power To Trailer Brake Controller on 2010 Dodge Ram 2500 Harness # 3021-P
  • It is possible that even with a factory installed 7-Way trailer connector and tow package on the 2010 Dodge Ram 2500 that you may still need to insert some fuses in the appropriate locations in the power distribution box under the hood to power the brake controller. If you look in the truck owners manual, it will show the location of the tow package fuses. If you check in the power distribution box, you may find those fuses missing so to power the tow package, you would insert the appropriate...
    view full answer...

  • Wiring Diagram for Firestone Level Command II On-Board Compressor Kit for Air Bag Suspensions
  • After a few moments of looking over the instructions provided by Firestone and comparing them to the video, I realized that in the printed instructions, the connections to the relay are not shown which is what is leading to your confusion. There are two black wires and four white wires extending from the rear of the gauge. The white wires are grouped into two bundles. One bundle of the white wires runs to the relay. The other bundle of white wires is combined with ONE of the black wires,...
    view full answer...

  • Can a 2010 Dodge Ram 2500 Diesel Tow an 11,500 Pound 5th Wheel Trailer
  • The truck's gross weight when loaded at 7,900 pounds will subtract from the gross combined weight rating which you stated is 20,000 pounds, not the payload capacity. The payload capacity is the amount of weight the bed can hold. As long as the pin weight of the trailer is under 2,340 pounds then your 2010 Ram 2500 is more than capable of towing the trailer. If needed, put some of the cargo towards the back of the trailer instead of in the truck cab or bed. Given that the trailer you...
    view full answer...

  • Location of Brake Controller Port on 2010 Dodge Ram For Tekonsha Brake Control Adapter, # 3021-P,
  • The brake controller harness is located under the dash on the drivers side, just left of the steering column, and near the emergency brake pedal. See picture at the right. I am sending a link on the installation instructions on a 2010 Dodge Ram. It shows the location of the factory port, for the plug in of the Tekonsha Brake Control Adapter - 2010 Dodge, # 3021-P, on your 2010 Dodge Ram 1500.
    view full answer...

  • Reducing Rattle and Noise from 5th Wheel Trailer Hitch While Driving
  • This is normal behavior for a 5th wheel trailer hitch. Considering the amount of weight involved and all of the steel components there is going to be some noise. Where the hitch fits in the rails has to have some play. If it was tight you would not be able to easily get the hitch in and out of the rails. There really is no way to completely stop this from happening. You can try using sound dampeners, # 16900, to fit between the hitch and rails. They are made to stop rattle and might...
    view full answer...

  • Required Axle Clearance for the Timbren Rear Suspension Enhancement System on a 2010 Ram 3500
  • The clearance that you will want between your truck frame and the rear axle for the Timbren Rear Suspension Enhancement System, # TDR3500CA, is either approximately 6-3/4 inches or approximately 7-3/4 inches (see photo). Once the Timbren springs are installed, you will want about a 1/2 inch gap between the bottom of the spring and the axle on a one ton truck. The springs and the bracket measure 6-1/4 inches long and they come with a 1 inch spacer in case you need the additional length.
    view full answer...

  • Installing Aftermarket Trailer Brake Controller, 2010 Dodge Ram 3500 with Factory Brake Controller
  • I spoke with my contact at Tekonsha about installing an aftermarket brake controller on a 2010 Dodge Ram 3500 with factory installed brake controller. He stated that you will get that error message and you will not be able to clear it. It is indicating that something is wrong with the factory unit and will remain as long as the factory unit is disconnected. It will not impact an aftermarket brake controller when installed, the aftermarket unit should still work properly. Since there...
    view full answer...

  • Will 5th Wheel Trailer Hitch Legs Mount in the Same Rail Spacing as a Slider 5th Wheel Hitch
  • On the 5th wheel installation rails, the holes a slider unit fits into and the holes the Replacement Base Legs for Reese 5th Wheel Trailer Hitch, # RP30727, fit into are the same distance apart. Or, in other words, once you have rails installed you will be able to drop in a set of legs or a slider and either one would fit. This method will tell you how far apart from each the rails will need to be, but it will not tell you where the rails will need to go in the bed. For that, you will...
    view full answer...

  • Brake Controller and Hitch Recommendation for 2010 Dodge Ram 1500
  • A travel trailer that's 20-24 feet in length is going to have brakes on it that will need to be activated when towing so you'll need a brake controller. For a brake controller I would recommend the Prodigy P3 Brake Controller part # 90195. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer...
    view full answer...

  • Trailer Brakes Work With Brake Controller But Not With Brake Pedal On A 2010 Dodge Ram 3500
  • On your 2010 Dodge 3500 I would use a circuit tester like the Quickee Tester, part # 3808, and probe the red wire on the back of your Tekonsha Prodigy P2 Brake Controller, part # 90885. When you step on the brake, the red wire should show a signal. If it does not, that means the controller is not receiving a signal from the brake pedal. If you hardwired the controller, check the red wire connection to be sure it is attached to the correct wire on the brake switch above the brake pedal....
    view full answer...

  • Fixing Muffler Rattling Against Curt Class III Hitch # 13364 on 2010 Dodge Grand Caravan
  • What you describe is a fairly common occurrence. The spot where the hitch sits on the vehicle does not vary from Grand Caravans of the same model year. However, since the exhaust system uses flexible rubber isolators and muffler hangers that are easily manipulated, the exact location of the exhaust system can vary quite a bit between vehicles of the same year, make and model. We've actually come up with a help article that specifically addresses this issue (see provided link), which...
    view full answer...

  • Transmission Cooler Recommendation for a 2010 Dodge Ram Towing an 8,000 Pound Trailer
  • Typically, you want the transmission fluid to be between 160 and 200 degrees so you are a little on the warm side. Adding a transmission cooler would be a great benefit because transmission fluid cannot be over cooled and having it run cooler extends the life of the transmission. The most popular supplemental cooler for your truck is # D13502 but I would go with the larger # D13503 that you have referenced to get more cooling efficiency. I have included some links on transmission coolers...
    view full answer...

  • What Are the Torque Ratings for 5th Wheel Trailer Hitch Installation Kit Rails for a 2010 Dodge Ram
  • On your 2010 Dodge Ram 3500, there are several possible 5th wheel installation kits that you may have used, all have different torque ratings. For the 5th Wheel Installation Kit # RP30035-186. I have included a link to the installation details below. You will need to look at step 11 on page 3 for the torque rating for this kit. If you used Curt 5th Wheel Installation Kit # C16420-204 (or -104), I have included those instructions as well. You will need to look at step 16 on page 3. If...
    view full answer...

  • Does Tekonsha P3 Brake Controller # 90195 in 2010 Ram Require Computer Re-Programming
  • You will not need to have your Ram 1500 computer flashed in order to use the Tekonsha P3 Brake Controller, part # 90195. You will only need to use the plug-n-play harness you referenced, part # 3021-P, to connect your Tekonsha P3 to your Ram under-dash brake control port. It may be necessary to instal some fuses under the hood to activate the tow wiring but if your Ram has the factory tow package these should be in place already. The first section of the linked article covers the controller...
    view full answer...

  • 5th Wheel and Gooseneck Trailer Truck Bed Wiring Harness for a 2011 Dodge Ram 3500
  • The 5th Wheel and Gooseneck wiring harness you will need for your 2011 Dodge Ram 3500 is the Draw-Tite Fifth Wheel and Gooseneck Wiring Harness # 20110. I spoke with my contact at Draw-Tite and he confirmed it will fit 2011 Dodge Rams with a factory 7-Way. When making the connections on your truck, I recommend adding some dielectric grease, # 11755, to keep out moisture and help ensure a corrosion-free connection. The Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole, # PK11893-11932,...
    view full answer...

  • Bike Rack to Carry 1 Bike on a 2010 Dodge Challenger RT
  • One of the best single bike rack we have is the Thule T1 Classic, part # TH9041, which is a hitch mounted bike rack. This is a platform rack that secures to the frame of the bike, as well as integrated hitch and bike locks for maximum security of the bike. If you don't already have a hitch mounted rack installed, I recommend Curt's Class III hitch, part # 13456 which is compatible with vehicles with and without the quad exhaust. I've included an installation video of this hitch onto...
    view full answer...

  • What Fifth Wheel Installation Kit Will Fit A 2011 Dodge Ram 3500 Mega Cab Using A Reese 16K Hitch
  • Currently, the available 5th wheel installation kit for a 2011 Dodge Ram 3500 Mega Cab is the Curt Custom Fifth Wheel Installation Kit, # C16420-104. This kit does include rails. I recommend using the Curt rails since they are designed to work with the brackets included in the kit. This installation kit is compatible with Curt, Draw-Tite, Hidden Hitch, Reese, Valley, and Husky fifth wheel hitches. I have included a link to the installation instructions for this kit below. If your...
    view full answer...

  • Choosing a Hitch for 2010 Dodge Grand Caravan with Stow-N-Go Seats
  • Your 2010 Dodge Grand Caravan with Stow-N-Go Seats can be fitted with either a light-duty 1-1/4-inch Class II hitch or a heavier duty 2-inch Class III type. We offer options in both sizes and all will fit your version of the Grand Caravan with Stow-N-Go seats. The link will let you see all options. I suggest a heavier-duty Class III type hitch because it will give you a greater safety margin and also be more widely compatible with a whole range of accessories like bike racks and cargo...
    view full answer...

  • Installing Top Line Bed Extender # BX4004-02 on 2010 Dodge Dakota with Plastic Bed Liner
  • The Topline Bed Extender you referenced, part # BX4004-02 is width-adjustable and will indeed fit your 2010 Dodge Dakota if the plastic liner you refer to covers a steel tailgate. You would need to drill through the liner to attach the bed extender, but the liner can remain in place. I have provided a photo showing the extender mounted to a tailgate that has the plastic liner.
    view full answer...

  • Prodigy P3 Brake Controller Installation in 2010 Dodge Ram 1500
  • The excellent Tekonsha Prodigy P3 Brake Controller # 90195 is intended for mounting with its included bracket as shown in the linked installation video. This unit's size and shape will prevent it from fitting properly in the small recess in your dash where the OEM brake controller goes. So long as your Ram has a factory 7-way at the back bumper all you need to wire in the P3 is harness # 3021-P, which connects between the controller and the under-dash ports. Dodge did move this connector...
    view full answer...

  • Will B&W Patriot Hitch Fit Valley Fifth Wheel Rails
  • The B and W Patriot part # BWRVK3270 that you referenced is designed to fit Valley fifth wheel rails like what you have so it would work well for you.
    view full answer...





^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.