Tailgate Specs:
Features:
This strong-as-steel plastic tailgate features a cutout that makes it perfect for towing a 5th-wheel or gooseneck trailer. The locking tailgate has built-in louvers that reduce drag, and it mounts securely with rotary latches and coated cables.
More Information >Videos
for Tailgate
Help Articles
for Tailgate
Expert Answers
for Tailgate
I do have an option for you but the Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate part #VGD-10-4000 does not have a spot for the factory backup camera. Therefore you would either need to find a way to mount this yourself, go without, or…
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said…
view full answer...Most manufacturers are in the process of discontinuing their fifth wheel tailgates with the camera relocation kits due to mechanical issues. Therefore I could not find one that fits your 2017 Ford F-350 Super Duty. The Stromberg Carlson 4000 Series…
view full answer...I recommend going with the Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs #AL89DQ for hauling around an in-bed camper with your 2024 Ford F-350 Super Duty. I really like this kit because it has the higher 7,500 lb rating (which you…
view full answer...Hi Chad! There are 2 ways to tell the difference between driver side and passenger side Dexter Axle brake assemblies; the first is by looking at the sticker on the inside, and the second is by looking at the brake assemblies as a whole. For…
view full answer...From what I have found, the ALKO hub and drum assembly you have is for 7,000 lb axles. I believe the Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 12" - 8 on 6-1/2 #8-219-4UC3 will work as a replacement.…
view full answer...Yes, the Dexter E-Z Flex Suspension Kit #K71-657-00 is the correct kit to upgrade your triple axle trailer which currently utilizes the 13-126 equalizer. Both these are designed for axle spacings 35" apart.
view full answer...The Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers #PE99CV does not come with great instructions. In order to install the Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers #PE99CV, you will need to…
view full answer...Most pintle hooks use a standard bolt pattern which is 3-3/8" horizontally center to center and 1-3/4" vertically center to center (see photo). Therefore, the Pintle Hook part #C48231 would be a direct fit…
view full answer...Feel free to send me an email of your setup. But if you can mount the Rack'em Double Barrel Trailer Tailgate Assist #RA-27C 10 to 15 inches higher than the floor the ramp is attached to this should work well for you since it has…
view full answer...For a 5th Wheel Tailgate like #VGD-10-4000, I recommend the Rear View Safety Backup Camera System with Flush Mount Camera #RVS-7707721 or the Rear View Safety Backup Camera System - Mirror with Monitor #RVS-772718 with this same camera. This is one…
view full answer...When installed on your 2000 Ford F-250 7.3L Diesel Engine, the Edge Evolution CTS3 Performance Tuner #EP96TR that you referenced will give you up to 120 horse power and 315 ft lbs of torque. This tuner will plug right into the…
view full answer...