2007 Vehicle Tent

Hey Tim, the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F2709 will indeed fit your 2024 GMC 2500 AT4X with a factory suspension lift. You will likely need to use a spacer kit to compensate for the lift, depending on the amount…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Thanks for the picture! While we do not have an exact replacement for a Profile 2000 winch we do recommend the Dutton-Lainson Hand Winch item #DL14627 as a replacement. This winch has an 1,800 lbs capacity and will work great with the 20' x…

The best option we'd have to replace the fenders on your trailer would be the Fulton Single Axle Trailer Fenders with Top and Side Steps part #F008584-2. The measurements we have for this fender appear to be very similar to that of the brackets…

I'd be happy to help you with that. For starters, the #F008584-2 fenders you'd looked at are designed for 14 inch wheels, you'd be better served going with the #F008585-2 which are designed for 15 inch wheels like the ones you have.…

Based on your images and measurements which are a great help I recommend going with the Fulton Single Axle Trailer Fenders #F008584-2. Instead of using your included mounts I recommend cutting them off the frame as they are far to close to your tires…

Based on your measurement and image it appears you will need the Fulton Single Axle Trailer Fenders with Top and Side Steps which we have in Black #F008584-2 or Silver #F008594-2. These fenders separate the side mounting holes 30-1/4" from front…

Hey Gregg, The etrailer Hard Tonneau Cover #e23DR mounts to the inner lip of the bedrails with clamps so you'll need access to that lip in order to install it. If your bed liner is plastic you can just cut out holes where the clamps sit in order…

The Roadmaster D-Ring adapters like the part #RM-035-1 can be used with the Demco tow bars.

Yes, the Redarc Tow-Pro Liberty Brake Controller #RED52VR will fit your 2016 Chevy Colorado Z71. Sometimes our fitguide lists things this way when there isn't a custom wiring harness available. Rest assured, this will fit your truck and any other…

Yes, there is. There are two options to add helper springs to your 2024 Ford Maverick. They both provide you with a 1,000 lbs load leveling capacity. Which one you need will be determined by whether your Maverick is a front wheel drive FWD or an all…

In regards to the Curt Trailer Hitch Receiver part #C15704 which is a fit for a 2003 Dodge Ram 3500, the distance from the top of the flange to the top of the hitch cross tube is 6.65" exactly.