Flat Tow Brake System Specs:
Accessory Parts:
Features:
Think of it as a one-time project that pays off on every trip. Once the Shadow 2 braking system is installed under the hood, you hook up, check your monitor, and drive away with the peace of mind that your towed vehicle is stopping safely behind you.
Installation Notes:
Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.
Tech Tip:
The brake pedal arm has a flange on the bottom which makes it too wide for the included hardware to attach the brake pedal clamp. You will need to locally purchase two #10-32 x 2 inch bolts and nuts.
More Information >Flat Tow Brake System Specs:
Features:
Imagine prepping for your trip and having your braking system ready in less than a minute. With the RVibrake 4, the audio assistant guides you step by step, so there's no fumbling or guesswork, just a quick and reliable setup every time.
More Information >Flat Tow Brake System Specs:
Features:
Small, light, and precise, this portable unit gets you smooth braking with basically no installation. Plugs directly into 12V outlet. Easy to swap between multiple cars. Control and monitor the system remotely from your motorhome with LCD display.
Installation Notes:
Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.
More Information >Flat Tow Brake System Specs:
Features:
Get safe, smooth braking for your towed car with this truly proportional braking system. Installs permanently so you can just plug and go. Low-profile design keeps it out of sight and out of the way. Includes convenient wireless braking monitor.
Installation Notes:
Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.
More Information >Flat Tow Brake System Specs:
Features:
Get safe, smooth braking for your towed car with this truly proportional braking system. Car slows perfectly in sync with your RV. Installs permanently so you can just plug in and go. Low-profile design keeps it out of sight and out of the way.
Installation Notes:
Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.
More Information >Flat Tow Brake System Specs:
Features:
This portable unit gets you smooth braking without a complex installation. Senses the RV braking and applies the brakes proportionally. Easy to swap between multiple towed cars: settings adjust for safe, even braking for any size car.
More Information >Flat Tow Brake System Specs:
Features:
Get fully proportional braking with a system that never has to be removed, replaced, or reset. Actuator installs out of sight and remains virtually invisible when your car isn't being towed. Controller also works as a trailer brake controller.
More Information >Flat Tow Brake System Specs:
Accessory Parts:
Features:
Stay on budget with this proportional braking system. More reliable than a portable system, cheaper than a permanent one. Lightweight actuator attaches to brake pedal and front seat and removes for storage. Car brakes perfectly in sync with RV.
Installation Notes:
The stop light switch kit listed is a requirement for proper usage of this braking system.
The BrakeMaster seat adapter listed is a requirement for using this supplemental braking system.
Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.
More Information >Flat Tow Brake System Specs:
Accessory Parts:
Features:
More reliable than a standard portable system, lightweight actuator attaches to brake pedal and driver's seat and removes for storage. Car brakes perfectly in sync with motorhome.
Installation Notes:
The stop light switch kit listed is a requirement for proper usage of this braking system.
The BrakeMaster seat adapter listed is a requirement for using this supplemental braking system.
Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.
More Information >Flat Tow Brake System Specs:
Accessory Parts:
Features:
Portable unit gets you smooth braking without a complex installation. Measures the RV's braking and applies your towed car's brakes with the same intensity, at the same time. Easy to swap between multiple cars. Includes LCD braking monitor.
Installation Notes:
The stop light switch kit listed is a requirement for proper usage of this braking system.
Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.
Brake light relay RM-88400 is included with the EvenBrake system.
More Information >
Filters
