Vehicle Suspension Specs:
Features:
...Adjusts progressively to the weight of your load - the more you load onto your vehicle, the stiffer they become Reduces body roll and helps level your truck Withstands extreme temperatures Durable springs...
Installation Notes:
No drilling required for installation
More Information >Vehicle Suspension Specs:
Features:
Upgrade your vehicle's suspension with these maintenance-free contact pads. Sturdy polyurethane contact pads reduce sway and noise for a smoother ride. Optional spacer increases preload. Includes 4 pads.
Installation Notes:
No drilling required for installation
Product is designed for vehicles with factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
...Helper springs upgrade your vehicle's front suspension for improved driver control and comfort Support heavy front-end loads to keep your vehicle level Help to absorb bumps and sh...
Installation Notes:
No drilling required for installation
More Information >Vehicle Suspension Specs:
Features:
...automatically to your payload Rollers on each end of the SuperSprings activate when the OEM springs flex under load Rollers deactivate when OEM springs aren't under load Customizable - the shackles attach...
Installation Notes:
No drilling required for installation
Product can be used for vehicles with or without factory top overload springs
Tech Tip:
For vehicles used in off-road rough conditions, SuperSprings recommends adding their Poly Pad mounting kit P5KT ), sold separately.
More Information >Vehicle Suspension Specs:
Features:
...Helper springs upgrade your vehicle's front suspension for improved driver control and comfort Support heavy front-end loads to keep your vehicle level Help to absorb bumps and sh...
Installation Notes:
No drilling required for installation
More Information >Vehicle Suspension Specs:
Features:
...automatically to your payload Rollers on each end of the SuperSprings activate when the OEM springs flex under load Rollers deactivate when OEM springs aren't under load Can be customized - the shack...
Installation Notes:
No drilling required for installation
Product can be used for vehicles with or without factory top overload springs
Tech Tip:
For vehicles used in off-road rough conditions, SuperSprings recommends adding their Poly Pad mounting kit P5KT; sold separately.
More Information >Vehicle Suspension Specs:
Features:
...for trucks with armor plating, bumper guards, and snowplows Made in the USA Specs: Quantity: 2 coil springs Weight capacity: 5,000 lbs SuperCoils will not increase your vehicle's weight-carrying capac...
Installation Notes:
No drilling required for installation
More Information >Vehicle Suspension Specs:
Features:
...for trucks with armor plating, bumper guards and snowplows Made in the USA Specs: Includes 2 front coil springs Capacity: 7,700 lbs SuperCoils will not increase your vehicle's weight-carrying capacity....
Installation Notes:
No drilling required for installation
Product will add approximately 2.5" of lift to suspension
More Information >Videos
for Vehicle Suspension
Help Articles
for Vehicle Suspension
Expert Answers
for Vehicle Suspension
For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…
view full answer...Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to…
view full answer...If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…
view full answer...The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…
view full answer...Hey Tarek, for your 2023 Ford Raptor I recommend checking out the Timbren Suspension Enhancement System #T75MR. This suspension enhancement system has a load leveling capacity of 3,000 lbs, will increase stability while reducing sag, and will…
view full answer...Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching…
view full answer...If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…
view full answer...It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the…
view full answer...Your trailer looks awesome! The Road armor equalizers #LC696740 and Equa-Flex Cushioned Equalizers #LC279687 are both pretty similar in performance even though the Road Armor has two dampers. The main difference is the size of the equalizers. The…
view full answer...From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights…
view full answer...Filter Products (16)