1988 Vehicle Snow Plows

Hi Winston; there are two options to mount a snow plow on your 2010 Ford F-150 FX4. If you want to use the Detail K2 Summit II Snowplow #K2SUMM8826 you looked at you will need the Custom Mounting Brackets for Detail K2 Snowplows #K281521. The…

Good question! The blade stiffeners that come with the Detail K2 Snowplow #K2AVAL8422 don't necessarily have to be used. I reached out to my contact at Detail K2 who said that the only time that those stiffeners really need to be used is if you…

Hello Rickey. The Curt Class 2 Hitch #C12181 is currently the only custom fit aftermarket hitch available for the 1991 Mitsubishi Montero and it uses a 1-1/4" receiver. The only way to add a 2" receiver to this vehicle would be to use a…

For your 2006 Honda Ridgeline, the K2 Avalanche plow is only a fit for the front mounted receiver. The custom mount brackets #K286110 are not a direct fit for your Avalanche plow but the mount does come with a crossbar and I've attached the photo…

If you have a front hitch installed ono your 2018 Chevy Silverado 3500 then you would not need anything else to use the Detail K-Summit Plow part #K2SUMM8826ELT that you referenced. If you do not have a front hitch we have the Curt part #C31071 that…

It is likely you can avoid the drain line when installing the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR by using the MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications #MR43WR. I don't know exactly the…

To install the Curt Hitch part #C31068 on your 2014 Ford F-150 with Ecoboost you will need to remove the air dam and then trim a small section of the lower fascia. See photo.

That's a really valid concern about the install of the Draw Tite hitch #65079 on your 2021 Jeep Wrangler 4xe Rubicon. I personally am not a fan of snow plows that attach to front hitches as from experience here at etrailer they just aren't…

The Detail K2 Snowplow for 2" Hitches #K2AVAL8219 does not include the Curt Front Mount Trailer Hitch Receiver #31241 that is needed for your 2020 Nissan Frontier. The plow will come with all the wiring needed for the winch on the plow. I…

K2 recommends that their #K281488LB2 Halogen High/Low Beam Light Kit with Turn Signals be used with their #K2AVAL8422 Avalanche snowplow. The kit includes the wiring harness, brackets and all necessary installation hardware. I've linked to a…

The Curt Front Mount Trailer Hitch Receiver #C31068 is my recommendation for your 2012 Ford F-150. I then recommend the Curt Class III Ball Mount with 2" Ball - 2" Drop #C45036 to allow you to launch and load your bass tracker boat. This…

Both the SnowBear Proshovel Snowplow, with Electric Actuator #SB324-168 and the SnowBear Personal Snowplow, with Electric Winch #SB324-080 will allow you to easily raise and lower the snowplow, and both come with an in-cab toggle switch, as well as a…