1988 Mud Flaps

Hi Mike; the best option for your 2025 Silverado 2500 ZR2 is definitely the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F2709 you looked at. These are going to be the most reliable and durable air bags out there. With a max psi of…

In order to use the Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2-1/2" Hitches part #ERT00110 you'll need a ball mount with extended length shank. For a 2-1/2" hitch, the best option we have would be the BulletProof Hitches…

Hey Paul; the Thule TracRac SR #TH43002XT-780 is a really nice rack and a great choice for your 2025 Sierra 2500. Since this installs on top of the bed rails you will need a tonneau cover that mounts inside the bed rails. Also, since the uprights…

Hello Michael, thanks for reaching out. The Gen-Y Torsion 2-Ball Mount #325-GH-1225 weighs 84 lbs altogether including the ball mount, ball attachment and pintle lock.

Hey Jason, since you have a Dexter 7,000 lb axle the correct bearing kit you would need is the part #BK3-210 which comes with the correct bearings and grease seal for a 7k hub. For grease I would recommend the LMX Red grease like part #L11390 for a…

Hey Kevin, so this is a very valid question but the integrated brake controller of your 2024 GMC Sierra 3500 has a hydraulic mode which allows it to be compatible with EOH actuators like the Hydrastar kit part #HSE7K-T1 that you are interested in so…

Bruce, I'd recommend going with the Roadmaster Direct Connect Base Plate Kit #RM97RR. This base plate is custom fit to your Maverick, is made in the USA, and includes all the hardware and instructions for install. If you're interested in a…

Hello Nick. Great question. For a Roll up option I do not have anything with the T-Slot option. I do however have the BAK Revolver X4s Hard Tonneau Cover - Roll Up - Aluminum and Vinyl - Matte Black #BAK54ZR, this cover does NOT have the T-slots, but…

Hey Bill, yes the Blue Ox Adjustable Mud Flap System part #BLU49UR can fit on the shank of a Blue Ox weight distribution system as long as for sure your hitch is the 2 inch hitch size. The part #BLU69UR that you referenced is the 2-1/2 inch hitch…

Hi David, Rock Tamers require an inch of space on the ball mount shank in order to mount. If the portion of the shank exposed where you'll be installing the Rock Tamers is 2" x 2" then you'll want #ERT00108, for 2.5" x…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Mike, thanks for reaching out! The 16K Pullrite SuperGlide #PUL43RR is an excellent option for towing your Grand Design with your 2025 F-250, and if you lockout your Lippert Turning Point pin box you'll be able to use them together. You…