2021 Nissan Titan XD Truck Bed Sliding Tray

The reverse light pin on a traditional 7-way trailer connector, like part #PK11893 or a factory connector if that's what you have on your 2018 Ram, is the center pin. Take a look at the picture I attached that shows all the pin functions. To add…

According to BedSlide the Factory Mount Installation Kit for BedSlide S and Classic #BE69WR will not work with any in bed towing packages such as 5th wheel & gooseneck towing packages. This installation kit you mentioned is actually designed to…

Hello John, There isn’t a specific weight rating listed for the Replacement Crank Extension for Lippert Spare Tire Winch Assemblies - 35-1/2" #LC1315411. However, most Lippert spare tire winches are rated to handle 100 lbs or more, which is more…

Chevy stopped using a port to plug in a brake controller after the 2006 model year. The tow package wires to install a brake controller are still present up under the dash, to the left of the steering column, held together with a white tag. The wires…

Hey Jerry, yes using the Air Lift kit part #AL83DQ would affect how the smart hitch and scale would function as that scale uses the suspension movement to determine how much weight is added into the bed of the truck. If the air bag kit minimizes…

The Truck Trolley Truck Bed Slide Out Tray for 8's Long Truck Beds item #TR99VR includes the Long Bed Extension Kit item #TR59VR. The Truck Trolley Truck Bed Slide Out Tray item #TR87VR is just the tray.

Hey Mike, thanks for reaching out. The 60" x 23" dimension listed for the #MR87ZV cargo tray is the overall dimensions of the tray. The inside dimensions of the tray are 58-1/4" long x 19-7/8" wide.

Hello Nelvin, thanks for reaching out, and congrats on the new truck. Between those two options I recommend the SumoSprings Rebel Custom Helper Springs #SSR-128-47-2. Those StableLoads are fine but you will see much better ride leveling with the…

Hi Adrian; the Invis-A-Rack #DZ951550 (6-1/2' bed) and #DZ951800 (8' bed) are not compatible with any available tonneau covers. There was a time where TruXedo made one for this rack but it has been discontinued for a while now. If you want to…

Advent Air Conditioners like part #ACM135 come with a connector that pairs up directly with the standard 6-wire connector. If you have a 9-wire connector then you need the kit #ACRG15 as well. For wiring I'm attaching some photos of diagrams for…

Hey Christian, thanks for reaching out! I have a wiring diagram for the Advent Air RV Air Conditioner #ACM150 (see attached), but I unfortunately don't have a photo of the back of the plug itself. You should still be able to follow the diagram…

Not knowing the model I can't confirm exactly what functions these pins serve for sure but I can say that on other 6-pin connectors like the one with the #ACDOM135B pin 1 is the Compressor Hot and pin 4 is the Low Fan. I've attached a diagram…